Owner`s manual

26
Playing Back Images Assigned to Pads
To play back an image, select a pad that has an image
assigned to it.
1. Select the BANK number.
Bank “B1” is selected in this example.
Press and hold the BANK [B] button.
Press PAD [1].
P-10_PAD1.eps
The BANK number switches to “B1.”
2. Press a PAD [1]–[12].
PAD [1] is selected in this example.
P-10_PAD2.eps
The image assigned to “B1-1” plays back.
The pads light up differently according to the type of
image assigned to them.
When you play back an image with audio, rotate
the [AUDIO VOLUME] knob to adjust the volume.
When multiple still images are assigned to a pad,
pressing the pad repeatedly changes the images in
order.
Depending on the movie quality or effects that are
applied, some movie frames may be skipped.
If you add an audio file to a movie, when you play
back the movie, the audio file plays back at the
same time. If you add an audio file to a movie that
has its own audio, the added audio plays back
when you play the movie.
For details, see “Specifying an Audio Files
(Additional Audio File)” (p. 44, p. 46).
1. Press the [EXIT] button.
Button_EXIT.eps
Image playback is stopped.
Connect an external device (such as a video camera or DVD
player) and you can display its images on the P-10’s display or
on an external display connected to the P-10.
Make sure you specify the video input jack
beforehand (p. 57).
1. Connect an external device to the P-10.
2. Turn on the P-10 and the external device.
3. Play back an image on the external device.
4. Press the [EXT SOURCE] button.
Button_EXTSource.eps
The image from the external device appears on the P-10
display and the external display (if connected).
To stop displaying images that are being input,
press the [EXT SOURCE] button again.
Playing Back Images
Pad
Assigned Image Type
Lit Red
Movie
Lit Blue Still Image
Unlit No Images Assigned
Stopping Image Playback
Displaying Input Images
P-10_e.book 26 ページ ２００８年７月１６日 水曜日 午後８時２３分