Owner`s manual

48
Copying Pad Parameters
Copy parameters from one pad and assign them to another
pad.
When you copy the pad parameters, the images
assigned to the pad are also copied.
1. Select the PAD button that you want to copy.
For details about selecting pads, see “Playing Back
Images” (p. 26).
2. Press the [PAD COPY] button.
Button_PADCOPY.eps
The bank number and pad number of the pad selected in
step one appear in “SOURCE.”
D05_08.eps
3. Press a pad that is flashing to select the copy
destination.
The selected bank number and pad number appear in
“DEST.”
D05_09.eps
4. Press the [ENTER] button.
The pad parameters are copied to the selected pad.
If you have selected a pad that is lit red (movie) or blue
(still image), the following screen appears.
D05_10.eps
If you want to overwrite the image assigned to the pad,
rotate the [VALUE] knob to select “Execute,” and then
press the [ENTER] button.
If you don’t want to overwrite the image assigned to the
pad, rotate the [VALUE] knob to select “Cancel,” and then
press the [ENTER] button.
Copying the Parameters of an Entire Bank
You can copy the parameters of an entire bank, such as
copying BANK A1-1–A12-12 to BANK C1-1–C12-12.
1. Press the [EXIT] button to stop image playback.
2. Press the [PAD COPY] button.
3. Select the BANK button that you want to copy.
4. Press the [ENTER] button.
5. Select the BANK button that you want to
assign copied data to.
6. Press the [ENTER] button.
P-10_e.book 48 ページ ２００８年７月１６日 水曜日 午後８時２３分