Owner`s manual

52
Specifying System Settings
Functions relating to the P-10’s operations are referred to as the “system.” The system settings that you can specify are listed in the
table below.
Items You Can Specify
MENU
Setting Item Description Page
INFORMATION
System Backup
Back up system settings to the SD card.
p. 55
System Restore Restore the system with settings that you have previously backed up.
p. 55
Project Backup Back up all of the bank data to the SD card.
p. 56
Project Restore Restore all of the banks with data that you have previously backed up.
p. 56
VIDEO
LCD Contrast
Adjust the display contrast.
p. 57
Video Format Select the video format (NTSC/PAL).
p. 57
Input Video Select the INPUT jack type.
p. 57
Capture Still Mode Specify the capture mode for still images (one shot/continuous).
p. 58
Color Ctrl Type Specify the color type applied to the [Color] knob.
p. 58
Speed Ctrl Type Specify the speed type applied to the [Speed] knob.
p. 58
Output Fade Color L
Specify the color that appears when the [VIDEO OUTPUT FADE] knob
is turned to the left.
p. 58
Output Fade Color R
Specify the color that appears when the [VIDEO OUTPUT FADE] knob
is turned to the right.
p. 58
Start LOGO Specify whether to display the Edirol logo when the P-10 starts up.
p. 59
AUDIO
Recording Gain
Specify the audio sensitivity applied to audio input from an external
source.
p. 59
P-10_e.book 52 ページ ２００８年７月１６日 水曜日 午後８時２３分