Owner`s manual

59
Menu
Specify whether the Edirol logo appears on the P-10’s display
when the power is turned on.
You can specify the sound level for audio that is input from a
device on the AUDIO screen.
D06_12.eps
The “L” and “R” meters at the bottom of the AUDIO screen
indicate the volume level of the input audio. While looking at
the level meter, rotate the [INPUT LEVEL] knob on the rear
panel to adjust the volume level.
When you rotate the knob to the right, the volume increases.
When you rotate the knob to the left, the volume decreases.
Specify this setting to amplify the volume of input audio.
Specify the settings on the MIDI menu when you have
connected the P-10 to a MIDI device.
D06_13.eps
D06_14.eps
D06_15.eps
Specifying the Startup Logo (Start LOGO)
Setting
Description
ON
Display the Edirol logo when the P-10
starts up.
OFF
Don’t display the Edirol logo when the P-
10 starts up.
AUDIO
Adjusting the Volume Level Using the
Level Meter
Adjusting the Audio Input Gain
(Recording Gain)
Setting Description
0, +6, +12
The higher the value you specify, the
greater the input gain becomes, and the
more the audio level is amplified.
MIDI
What is MIDI?
MIDI, short for Musical Instrument Digital Interface, is a
standardized protocol for performance communication
between musical devices that is used throughout the
world. You can easily connect devices that support MIDI
with a MIDI cable and control one device’s operations
and settings through another.
P-10_e.book 59 ページ ２００８年７月１６日 水曜日 午後８時２３分