Owner`s manual

74
Troubleshooting
Can’t capture images with the
P-10
Is the SD card write protect switch set to “Lock”?
→ Move the switch to unlock the SD card.
p. 67
Is PROTECT on the MENU screen set to “ON”?
→ Set PROTECT to “OFF.”
p. 62
Is there enough memory on the SD card?
→ When there is insufficient memory on the SD card, the CAPTURE [STILL] and
CAPTURE [MOVIE] buttons don’t light up. Check the available SD card memory from
the INFORMATION menu.
p. 55
Are you using the right type of SD card?
→ Depending on the SD card, the write speed may be extremely slow and you may not
be able to capture images. Check the recommended SD card types for the P-10.
p. 67
The P-10 cannot capture images from media with technical security measures (copy
guard signal).
–
Effects don’t work
Is the [EXT SOURCE] button on?
→ When the [EXT SOURCE] button is on, images from the device connected to the P-10
appear on the P-10’s display. You can’t apply effects to images from an external
source.
p. 26
Is a slide show being displayed?
→ While a slide show is being displayed, the [SPEED], [COLOR], and [VIDEO OUTPUT
FADE] knobs are ineffective.
p. 30
Is a still image being played back?
→ While a still image is being played back, the [SPEED] knob and [REPEAT A B]
button don’t work.
p. 28
Even when the SD card is
inserted, the P-10 doesn’t
recognize it
Is the SD card inserted correctly?
→ Please check the SD card.
p. 17
Are you using the right type of SD card?
→ For the recommended SD card types, see “Recommended SD Cards.”
p. 67
Problem
Cause/Solution Page
P-10_e.book 74 ページ ２００８年７月１６日 水曜日 午後８時２３分