Owner`s manual

Troubleshooting

When an error message appears on the P-10, the P-10 is not functioning correctly for some reason or there was an error in user

operation. Try the following solutions when this happens.

Error Messages

Message

Description/Solution

This file cannot be used on

P-10.

This is a file that cannot be used on the P-10.

Convert the file to a P-10 supported format using P-10 Image Converter and save it to the SD card.

This card cannot be used on

P-10.

Because there is a problem with the card, it cannot be used.

See “Recommended SD Cards” (p. 67).

No remaining capacity in SD

card.

The SD card memory is full.

Delete some files from the SD card or use a new SD card.

Desired file does not exist.

The image file does not exist on the SD card.

Capture images from a connected device or use P-10 Image Converter to save image files to the

SD card (p. 37).

Select still image file.

Select a still image.

Select movie file.

Select a movie.

This list is maximum. You

cannot add on the still image.

The still image list has reached 100 images.

If you want to add images to the list, delete some of the images in the list first.

This card is protected.

The SD card write protect switch is in the “LOCK” position.

Move the switch to unlock the SD card.

Backup file does not exist.

The System Backup file doesn’t exist.

Now processing.

DO NOT turn off power.

The system is processing.

Don’t turn off the power.

P-10_e.book 75 ページ２００８年７月１６日　水曜日　午後８時２３分