User Manual

Backing Up the Settings
109
Backing Up All Data to a USB
Flash Drive (SAVE)
Here’s how to back up the entire contents of user
memory (p. 16) to your USB ash drive (up to 99 sets).
1. Connect your USB ash drive to the TD-30’s USB
MEMORY port (p. 85).
2. Press the [USB MEM] button.
The [USB MEM] button will light, and the USB MEMORY A
screen will appear.
3. Press the [F1] (SAVE) button.
The USB SAVE screen will appear.
4. Use the [–] [+] buttons or the dial to select the
backup number in which you want to save your
settings.
Backup number that contain no data are indicated by a
"*" preceding the backup name.
MEMO
If you press the [F4] (NEW) button, the lowest-
numbered backup number that contains no data will
be selected.
5. Press the [F5] (SAVE) button.
A conrmation message will appear.
If you decide to cancel, press the [F1] (CANCEL) button.
MEMO
If you want to assign a name to the backup data,
press the [F4] (NAME) button.
6. Press the [F5] (EXECUTE) button.
Your data will be saved on the USB ash drive.
Naming your backup data (NAME)
If you want to assign a name to the backup data,
press the [F4] (NAME) button at the conrmation
message in step 5.
The USB SAVE NAME screen will appear.
For details on how to assign a name, refer to
“Assigning a Name” (p. 29).
The name you assign here is shown only on the
TD-30.
AppendicesExpansionSettingsPerformanceSetupOverview