User Manual

Table Of Contents
Backing Up the Settings
110
Loading Backup Data from a
USB Flash Drive (LOAD)
Heres how to load backup data from a USB ash drive
into the TD-30.
1. Connect your USB ash drive to the TD-30’s USB
MEMORY port (p. 85).
2. Press the [USB MEM] button.
The [USB MEM] button will light, and the USB MEMORY A
screen will appear.
3. Press the [F2] (LOAD) button.
The USB LOAD screen will appear.
4. Use the [–] [+] buttons or the dial to select the
backup data that you want to load.
5. Press the [F5] (LOAD) button.
A conrmation message will appear.
If you decide to cancel, press the [F1] (CANCEL) button.
6. Press the [F5] (EXECUTE) button.
The data will be loaded from the USB ash drive.
MEMO
Drum kit and pad settings can also be copied
individually from backup data that you’ve saved on a
USB ash drive (p. 49, p. 63).
You can audition the drum kits saved on a USB ash
drive before loading data from the USB ash drive.
For details, refer to “Playing a Kit from the USB Flash
Drive Without Loading It (Kit Selection) (KIT SEL)” (p. 123).
Importing Kit Data from
TD-20/TD-20X Backup Data
(IMPORT)
Kit data can be imported from TD-20, TD-20X, or TDW-20
backup data.
Drum kits backed up by the TD-20 will be loaded into
drum kits 1–50. Drum kits backed up by the TD-20X or
TDW-20 will be loaded into drum kits 1–100.
1. Find the backup data that you want to import,
and copy it to your USB ash drive.
Use your computer to copy the TD-20, TD-20X, or TDW-
20 backup data to a USB ash drive.
Copy the backup in the Import folder of your USB ash
drive.
Root Directory (the top level)
Roland
TD-30
Import
USB ash drive
MEMO
Files saved by backing up on the TD-20 are named
TD20BK**.TD0, and les saved by backing up on the
TD-20X are named TDW2BK**.TD0.
Pad pattern settings and multi-eect settings are not
copied. Make these settings as necessary.
2. Connect your USB ash drive to the TD-30’s USB
MEMORY port (p. 85).
3. Press the [USB MEM] button.
The [USB MEM] button will light, and the USB MEMORY A
screen will appear.
4. Press the [F3] (IMPORT) button.
The USB IMPORT screen will appear.