User Manual

Backing Up the Settings
111
5. Press the [F1] (TD-20) button or the [F2] (TD-20X)
button to specify the type of backup data.
Button Explanation
[F1] (TD-20) button
TD-20 backup data will be
imported.
[F2] (TD-20X) button
TD-20X or TDW-20 backup data will
be imported.
(Example: When [F1] (TD-20X) is selected)
7. Use the [–] [+] buttons or the dial to select the
backup data that you want to import.
8. Press the [F5] (IMPORT) button.
A conrmation message will appear.
If you decide to cancel, press the [F1] (CANCEL) button.
9. Press the [F5] (EXECUTE) button.
The kit data will be imported from the USB ash drive.
Deleting Backup Data from a
USB Flash Drive (DELETE)
You can delete the unneeded backup data from a USB
ash drive.
1. Connect your USB ash drive to the TD-30’s USB
MEMORY port (p. 85).
2. Press the [USB MEM] button.
The [USB MEM] button will light, and the USB MEMORY A
screen will appear.
3. Press the [F4] (DELETE) button.
The USB DELETE screen will appear.
4. Press the [F1] (BACKUP) button or the [F2] (1 KIT)
button to specify the type of backup data.
Button Explanation
[F1] (BACKUP) button The backup data will be deleted.
[F2] (1 KIT) button The kit data will be deleted.
(Example: When [F1] (BACKUP) is selected)
6. Use the [–] [+] buttons or the dial to select the
backup data that you want to delete.
7. Press the [F5] (DELETE) button.
A conrmation message will appear.
If you decide to cancel, press the [F1] (CANCEL) button.
8. Press the [F5] (EXECUTE) button.
The data will be deleted from the USB ash drive.
AppendicesExpansionSettingsPerformanceSetupOverview