User Manual

Backing Up the Settings
112
Backing Up a Drum Kit to a USB
Flash Drive (KITSAVE)
Here’s how you can save drum kit data to your USB ash
drive (up to 999 kits).
1. Connect your USB ash drive to the TD-30’s USB
MEMORY port (p. 85).
2. Press the [USB MEM] button.
The [USB MEM] button will light, and the USB MEMORY A
screen will appear.
3. Press the [F5] (A B) button.
The USB MEMORY B screen will appear.
4. Press the [F1] (KITSAVE) button.
The USB SAVE (1 KIT) screen will appear.
Drum kit to back up
Backup number
5. Use the cursor buttons and the [–] [+] buttons or
the dial to select the drum kit that you want to
back up and the backup number.
If you press the [F4] (NEW) button, the lowest-numbered
backup that contains no data will be selected.
6. Press the [F5] (SAVE) button.
A conrmation message will appear.
If you decide to cancel, press the [F1] (CANCEL) button.
7. Press the [F5] (EXECUTE) button.
The data will be saved to USB memory.
Loading Kit Data from a USB
Flash Drive (KITLOAD)
Here’s how kit data saved on a USB ash drive can be
loaded into the TD-30.
1. Connect your USB ash drive to the TD-30’s USB
MEMORY port (p. 85).
2. Press the [USB MEM] button.
The [USB MEM] button will light, and the USB MEMORY A
screen will appear.
3. Press the [F5] (A B) button.
The USB MEMORY B screen will appear.
4. Press the [F2] (KITLOAD) button.
The USB LOAD (1 KIT) screen will appear.
Kit data to load
Loading-destination drum kit
5. Use the cursor buttons and the [–] [+] buttons
or the dial to select the kit data that you want to
load, and the drum kit into which you want to
load it.
6. Press the [F5] (LOAD) button.
A conrmation message will appear.
If you decide to cancel, press the [F1] (CANCEL) button.
7. Press the [F5] (EXECUTE) button.
The kit data will be loaded from the USB ash drive.