User Manual

Backing Up the Settings
113
Checking the State of a USB
Flash Drive (INFO)
Here’s how to view information about the items on a USB
ash drive, such as the number of items.
1. Connect your USB ash drive to the TD-30’s USB
MEMORY port (p. 85).
2. Press the [USB MEM] button.
The [USB MEM] button will light, and the USB MEMORY A
screen will appear.
3. Press the [F5] (A B) button.
The USB MEMORY B screen will appear.
4. Press the [F3] (INFO) button.
The USB MEMORY INFORMATION screen will appear.
Parameter Explanation
Backup All Number of backups saved
Backup 1 Kit Number of drum kits saved
Pattern Number of patterns saved
Audio File Number of audio les saved
5. Press the [KIT] button to return to the DRUM KIT
screen.
The [USB MEM] button goes o.
MEMO
For details on saving patterns, refer to ““Saving
Patterns on a USB Flash Drive (SAVE)” (p. 105).
Formatting a USB Flash Drive
(FORMAT)
Here’s how to initialize (format) a USB ash drive.
NOTE
When you execute this operation, all data saved on
the USB ash drive will be lost. If the USB ash drive
contains important data, back it up to your computer
before you proceed with initialization.
1. Connect your USB ash drive to the TD-30’s USB
MEMORY port (p. 85).
2. Press the [USB MEM] button.
The [USB MEM] button will light, and the USB MEMORY A
screen will appear.
3. Press the [F5] (A B) button.
The USB MEMORY B screen will appear.
4. Press the [F4] (FORMAT) button.
The USB FORMAT screen will appear.
5. Press the [F5] (FORMAT) button.
A conrmation message will appear.
If you decide to cancel, press the [F1] (CANCEL) button.
6. Press the [F5] (EXECUTE) button.
The format operation will be executed.
AppendicesExpansionSettingsPerformanceSetupOverview