User Manual

Overall Settings for the TD-30 (SETUP)
115
Output Assignments (OUTPUT)
You can choose how the outputs will function from the
MASTER OUT jacks and DIRECT OUT jacks.
All sounds are always output from the PHONES jack.
1. In the SETUP A screen (p. 114), press the [F1]
(OUTPUT) button.
The OUTPUT ASSIGN screen will appear.
[F1] (MASTER) button
Output assignments from each pad to the MASTER OUT jacks.
[F2] (DIRECT) button
Output assignments from each pad to the DIRECT OUT 1–8
jacks.
[F3] (OTHER) button
Output assignments from ambience and MFX etc. to the
MASTER OUT jacks and DIRECT OUT 5–8 jacks.
[F4] (MONITOR) button
This lets you check the output volume of each jack.
MEMO
The OUTPUT MONITOR screen can also be accessed by
pressing the [KIT] button the [F2] (FUNC) button the
[F5] (MONITOR) button (p. 48).
[F5] (DEFAULT) button
Pressing this button will return all displayed output assign-
ments to their default settings (p. 116).
2. Use the function buttons to select the
assignments you want to make.
3. Use the cursor [ ] [ ] buttons to select the
output assignment you want to change.
In the screens accessed by the [F1](MASTER) or [F2]
(DIRECT) buttons, you can also select an output by
striking a pad or using the TRIG SELECT buttons.
[F1] (MASTER), [F2] (DIRECT) screens
Trigger
input
Display
Trigger
input
Display
Trigger
input
Display
KICK K HI-HAT H AUX 1 A
SNARE S CRASH 1 C AUX 2 A
TOM1 1 CRASH 2 C AUX 3 A
TOM2 2 RIDE R AUX 4 A
TOM3 3 EDGE E
TOM4 4
[F3] (OTHER) screen
Button Explanation
AMB Ambience (p. 69)
MFX Multi-eects (p. 71)
BACK The pattern’s backing parts (p. 93)
PERC The pattern’s percussion part (p. 93)
CLICK Metronome click (p. 82)
MIXIN
The sound being input to the MIX
IN jack
USBSONG Audio le (p. 86)
4. Use the [–] [+] buttons, the dial, or the cursor [ ]
[ ] buttons to select an output destination.
5. Press the [EXIT] button to return to the SETUP
screen.
AppendicesExpansionSettingsPerformanceSetupOverview