User Manual

Overall Settings for the TD-30 (SETUP)
116
Output Destination Setting
Examples
Here are some examples of output destination settings.
MEMO
The MASTER OUT jacks and the DIRECT OUT 1–8 jacks
are unbalanced.
Default settings
As the chart below illustrates, the PHONES jack and the
MASTER OUT jacks will output all sounds. Individual
sounds are assigned to DIRECT OUT 1-8 jacks for
individual sound control with a PA system.
Jack Output Example destination
PHONES All Monitor headphones
MASTER OUT All Drum monitor
DIRECT OUT 1 KICK
PA (external mixer)
DIRECT OUT 2 SNARE
DIRECT OUT 3 HI-HAT
DIRECT OUT 4 RIDE, EDGE
DIRECT OUT
5/6
TOM 1–4 (Stereo)
DIRECT OUT
7/8
CRASH 1, 2,
AUX 1–4 (Stereo)
Sending the same audio for monitoring
and PA
With these settings, the same sound will be output from
the PHONES jack, the MASTER OUT jacks, and the DIRECT
OUT 7/8 jacks.
The sound being monitored by the performer will be the
same as the sound sent to the PA system.
Jack Output Example destination
PHONES All Monitor headphones
MASTER OUT All Drum monitor
DIRECT OUT 1 − −
DIRECT OUT 2 − −
DIRECT OUT 3 − −
DIRECT OUT 4 − −
DIRECT OUT
5/6
− −
DIRECT OUT
7/8
All PA (external mixer)
Sending Ambience and/or MFX
separately
This chart shows how you can use the MASTER OUT jacks
to output the Ambience and/or MFX (multi-eects).
This allows the PA engineer to balance the eects with
the individual sounds.
Jack Output Example destination
PHONES All
Monitor headphones,
drum monitor
MASTER OUT Ambience only
PA (external mixer)
DIRECT OUT 1 KICK
DIRECT OUT 2 SNARE
DIRECT OUT 3 HI-HAT
DIRECT OUT 4 RIDE, EDGE
DIRECT OUT
5/6
TOM 1–4 (Stereo)
DIRECT OUT
7/8
CRASH 1, 2,
AUX 1–4 (Stereo)