User Manual

Overall Settings for the TD-30 (SETUP)
117
Assigning a Function to a
Footswitch or Pad (CONTROL)
Here’s how to assign a function to a footswitch or pad.
Assigning a Function to a
Footswitch (FOOT SW)
You can connect a footswitch (sold separately: FS-5U, FS-
6) and assign it to perform a function such as switching
drum kits or playing patterns.
Connecting an FS-5U
SW2SW1
White
Stereo 1/4” phone type
1/4” phone type x 2
Red
POLARITY switch
* If you use a mono cable to connect a single FS-5U, it
will operate as SW 2.
* The FS-5L cannot be used.
Connecting an FS-6
Stereo 1/4” phone type
Stereo 1/4” phone type
SW2
SW1
MODE/POLARITY switch
1. In the SETUP A screen (p. 114), press the [F2]
(CONTROL) button.
2. Press the [F1] (FOOT SW) button.
The FOOT SWITCH screen will appear.
3. Use the [–] [+] buttons or the dial to select the
function for footswitches.
When setting to “USER,” use the cursor buttons to move
the cursor to “SW1” or “SW2.”
Function Display Explanation
KIT SELECT
SW1 KIT# DEC
Calls up the previous
kit.
SW2 KIT# INC Calls up the next kit.
CHAIN
SELECT
SW1 CHAIN# DEC
Calls up the previous
drum kit chain.
SW2 CHAIN# INC
Calls up the next drum
kit chain.
USB SONG
SELECT
SW1
USB SONG#
DEC
Calls up the previous
audio le.
SW2 USB SONG# INC
Calls up the next audio
le.
USB SONG
PLAY
SW1 USB SONG# INC
Calls up the next audio
le.
SW2
USB SONG
/
Play/stop the audio le.
PATTERN
SELECT
SW1 PATTERN# DEC
Calls up the previous
pattern.
SW2 PATTERN# INC
Calls up the next
pattern.
PATTERN
PLAY
SW1 PATTERN# INC
Calls up the next
pattern.
SW2
PATTERN
/
Plays back/stops the
pattern.
FIXED HH/
STRAINER *
SW1 FIXED HH
Species whether the
hi-hat’s Fixed Hi-Hat
setting (p. 58) will be set
to “FIXED 2.”
SW2 STRAINER
Species whether the
snare’s Strainer Adj.
setting (p. 57) will be
turned “OFF.”
AMB/MFX
SW
SW1 AMBIENCE SW
Turns the ambience
eect switch (p. 71) on/
o.
SW2 MFX SW
Turns the multi-eect
switch (p. 72) on/o.
AppendicesExpansionSettingsPerformanceSetupOverview