User Manual

Overall Settings for the TD-30 (SETUP)
120
Other Settings (OPTION)
Here you can make settings for the preview button,
the master compressor/equalizer, MIX IN jack, and the
display.
Specifying the Preview Velocity
(PREVIEW)
Here, the [PREVIEW] button velocity can be set.
1. In the SETUP A screen (p. 114), press the [F3]
(OPTION) button.
2. Press the [F1] (PREVIEW) button.
The PREVIEW screen will appear.
The graph in the right side of the screen is a “velocity
monitor” that shows the force (velocity) of your strike.
3. Use the cursor [ ] [ ] buttons to select the
parameter.
4. Use the [–] [+] buttons or the dial to make
settings.
Parameter Value Explanation
Dynamics
OFF No velocity. Level is xed.
ON
Button responds to
velocity.
Velocity 1–127
Velocity when Dynamics is
set to “OFF.”
5. Press the [EXIT] button to return to the SETUP
screen.
Making the Master Comp/EQ Settings
Identical for All Kits (COMP/EQ)
You can specify which is used for the master comp/EQ
(p. 78), individual settings for each drum kit or common
settings to all kits.
1. In the SETUP A screen (p. 114), press the [F3]
(OPTION) button.
2. Press the [F2] (COMP/EQ) button.
The MASTER COMP/EQ MODE screen will appear.
3. Use the [–] [+] buttons or the dial to make
settings.
Parameter Value Explanation
MASTER
COMP/EQ
EACH KIT
Master comp/EQ for each
kit, individually.
GLOBAL
Master comp/EQ common
to other drum kits is used.
When this is set to “GLOBAL,” “GLOBAL” appears on the
icon at the left part of the master comp/EQ setting
screen.
4. Press the [EXIT] button to return to the SETUP
screen.