User Manual

Overall Settings for the TD-30 (SETUP)
121
Using the MIX IN Jacks as Two
Monaural Inputs (MIX IN)
The MIX IN jack can handle mono or stereo signal.
If it occurs that the audio signal going to the MIX IN jack
has a click on the left side, and the backing track on the
right side, you can use this function to merge the signals.
1. In the SETUP A screen (p. 114), press the [F3]
(OPTION) button.
2. Press the [F3] (MIX IN) button.
The MIX IN SETTING screen will appear.
3. Use the cursor [ ] [ ] buttons to select the
parameter.
4. Use the [–] [+] buttons or the dial to make
settings.
Parameter Value Explanation
Input
Selects the jack(s) to use as an input.
L + R Use both channels
L ONLY Use only the left channel
R ONLY Use only the right channel
Mode
STEREO Use as stereo input
MONO Use as monaural x 2
Gain 0, +6, +12 dB Adjusts the input level
5. Press the [EXIT] button to return to the SETUP
screen.
Adjusting the Display Contrast
(LCD)
The display contrast is strongly inuenced by the
location of the TD-30 and the lighting of the room it’s in.
Adjust this parameter when needed.
1. In the SETUP A screen (p. 114), press the [F3]
(OPTION) button.
2. Press the [F5] (LCD) button.
The LCD CONTRAST screen will appear.
3. Use the [–] [+] buttons or the dial to adjust.
Parameter Value Explanation
LCD Contrast 1–16 Display contrast
LCD Brightness 1–16 Display brightness
MEMO
The LCD Contrast can also be adjusted by holding
down the [KIT] button and turning the dial.
4. Press the [EXIT] button to return to the SETUP
screen.
AppendicesExpansionSettingsPerformanceSetupOverview