User Manual

Overall Settings for the TD-30 (SETUP)
124
Digital Audio Level (GAIN)
Here’s how to adjust the volume for the DIGITAL OUT jack
and the USB COMPUTER port (USB Audio).
1. In the SETUP B screen (p. 114), press the [F2] (GAIN)
button.
The DIGITAL IN/OUT GAIN screen will appear.
2. Use the [–] [+] buttons or the dial to edit the
parameters.
Parameter Value Explanation
USB AUDIO
Input Gain
-36–0–+12 dB
Adjusts the volume of
the input to the USB
COMPUTER port
(default setting: -18 dB).
USB AUDIO
Output
Gain
-24–0–+24 dB
Adjusts the volume of
the output from the USB
COMPUTER port.
Digital
Output
Gain
-24–0–+24 dB
Adjusts the volume that is
output from the DIGITAL
OUT jack.
3. Press the [EXIT] button to return to the SETUP B
screen.
Auto O Function (AUTOOFF)
The TD-30 has an “Auto o” function that automatically
turns the TD-30 o if 4 hours have elapsed without any
pad being played or any operation performed.
To cancel this function, proceed as follows to set the auto
o function to the “OFF” setting.
1. In the SETUP C screen (p. 114), press the [F1]
(AUTOOFF) button.
The AUTO OFF SETTING screen will appear.
2. Use the [–] [+] buttons or the dial to set the auto
o setting.
Value Explanation
OFF
The auto o function will not
operate.
4 HOURS
The unit will automatically turn
o when four hours have elapsed
without any pad being struck or
any operation performed.
3. Press the [EXIT] button to return to the SETUP
screen.
* If you need to turn o the power completely, rst
turn o the [ON] switch, then unplug the power cord
from the “Power Supply” (p. 6).
MEMO
If the auto-o function is set to “4 HOURS,” the
message “WARNING: AUTO OFF, The TD-30 will turn
o in 30 min.” will appear 30 minutes before turning
the TD-30 o.