User Manual
Table Of Contents
- USING THE UNIT SAFELY
- IMPORTANT NOTES
- Contents
- Overview
- Setup
- Performance
- Drum Kit
- Instrument
- Mixer
- Effects
- Tempo
- Song Player
- Pattern Sequencer
- Settings
- Backing Up the Settings
- Data saved in USB flash drive
- Backing Up All Data to a USB Flash Drive (SAVE)
- Loading Backup Data from a USB Flash Drive (LOAD)
- Importing Kit Data from TD-20/TD-20X Backup Data (IMPORT)
- Deleting Backup Data from a USB Flash Drive (DELETE)
- Backing Up a Drum Kit to a USB Flash Drive (KITSAVE)
- Loading Kit Data from a USB Flash Drive (KITLOAD)
- Checking the State of a USB Flash Drive (INFO)
- Formatting a USB Flash Drive (FORMAT)
- Overall Settings for the TD-30 (SETUP)
- Output Assignments (OUTPUT)
- Assigning a Function to a Footswitch or Pad (CONTROL)
- Other Settings (OPTION)
- Restoring the Factory Settings (F RESET)
- Playing a Kit from the USB Flash Drive Without Loading It (Kit Selection) (KIT SEL)
- Digital Audio Level (GAIN)
- Auto Off Function (AUTOOFF)
- Viewing the Remaining Memory and the Program Version (INFO)
- Trigger Settings
- Backing Up the Settings
- Expansion
- Appendices
Trigger Settings
129
Adjusting the oset of VH-13/VH-12
automatically
If you’re using the VH-13/VH-12 V-hi-hat, execute the
oset automatically adjustment from the TD-30 after
making connections.
This adjustment is required in order to correctly detect
open, close, and pedal operations.
1. Set the hi-hat’s Trigger Type to “VH13” (or
“VH12”) (p. 126).
2. In the TRIGGER HI-HAT screen, [F4] (OFFSET)
button.
The VH OFFSET ADJUSTMENT screen will appear.
3. Loosen the clutch screw of the top hi-hat and let
it sit on the bottom hi-hat.
* Do NOT touch the hi-hats or the pedal.
4. Press the [F5] (EXECUTE) button.
The [TRIGGER] button ashes, and the oset parameter is
set automatically.
When nished, the [TRIGGER] button stops ashing and
remains lit, and the TRIGGER HI-HAT screen appears.
MEMO
You can also perform this operation by holding down
the [KIT] button and pressing the [TRIGGER] button.
Settings for the VH-11
Set Trigger Type to “VH11” (p. 126).
Parameter Value Explanation
Foot Splash
Sens
-10–+10
Amount of how easy to
make the foot splash
CC Max
90, 127
(initial value: 90)
Amount of control change
that is transmitted in
stepping the pedal down
completely.
* There’s no need to
change this setting if
you’re performed only
with the TD-30 and the
pads.
Adjusting the oset of VH-11
If you’re using the VH-11 V-hi-hat, execute the oset
adjustment from the TD-30 after making connections.
This adjustment is required in order to correctly detect
open, close, and pedal operations.
1. Connect the VH-11 and TD-30.
2. After making the hi-hat settings, release your
foot from the pedal, and while keeping your foot
o the pedal, turn on the TD-30.
3. Loosen the clutch screw and let the hi-hat rest
naturally on the motion sensor unit.
4. Press the [TRIGGER] button.
5. Press the [F1] (BANK) button.
The [TRIGGER] button will light, TRIGGER BANK screen
will appear.
6. Press the [F3] (HI-HAT) button.
The TRIGGER HI-HAT screen will appear.
7. Set the Trigger Type for hi-hat to “VH11” (p. 126).
AppendicesExpansionSettingsPerformanceSetupOverview