User Manual
Table Of Contents
- USING THE UNIT SAFELY
- IMPORTANT NOTES
- Contents
- Overview
- Setup
- Performance
- Drum Kit
- Instrument
- Mixer
- Effects
- Tempo
- Song Player
- Pattern Sequencer
- Settings
- Backing Up the Settings
- Data saved in USB flash drive
- Backing Up All Data to a USB Flash Drive (SAVE)
- Loading Backup Data from a USB Flash Drive (LOAD)
- Importing Kit Data from TD-20/TD-20X Backup Data (IMPORT)
- Deleting Backup Data from a USB Flash Drive (DELETE)
- Backing Up a Drum Kit to a USB Flash Drive (KITSAVE)
- Loading Kit Data from a USB Flash Drive (KITLOAD)
- Checking the State of a USB Flash Drive (INFO)
- Formatting a USB Flash Drive (FORMAT)
- Overall Settings for the TD-30 (SETUP)
- Output Assignments (OUTPUT)
- Assigning a Function to a Footswitch or Pad (CONTROL)
- Other Settings (OPTION)
- Restoring the Factory Settings (F RESET)
- Playing a Kit from the USB Flash Drive Without Loading It (Kit Selection) (KIT SEL)
- Digital Audio Level (GAIN)
- Auto Off Function (AUTOOFF)
- Viewing the Remaining Memory and the Program Version (INFO)
- Trigger Settings
- Backing Up the Settings
- Expansion
- Appendices
Trigger Settings
136
Making Advanced Settings for
Strike Position Detection (POSI)
Parameter Value Explanation
Position
Detect
OFF, ON Positional sensing on/o
3Way Trigger OFF, ON
Enable/disable separate
triggering of bow/bell/
edge strikes on the ride
cymbal
Strike Position Detection On/O
(Position Detect)
For the pads listed below, strike position detection can
be turned on/o.
If you turn strike position detection on, you’ll be able to
produce tonal change by varying the strike position on
the head or by changing the nuance of your rim shots.
Pads that can detect the strike position
• 2 SNARE (head/rim)
• 3–6 TOM 1–4 (rim)
• 10 RIDE (bow)
• 12–15 AUX 1–4 (head/rim)
* If you select a “Trig Type” that does not support strike
position, the value is shown as “---” and cannot be
edited.
Parameter Value Explanation
Head OFF, ON
Turns head strike position
detection on/o
Rim OFF, ON
Turns rim strike position
detection on/o
Settings for Separate Triggering of Ride
Strikes (3Way Trigger)
When using the CY-15R or CY-12R/C for the RIDE, you
can three way triggering (bow, bell, and edge shot)
performance are possible.
Connect as shown in p. 37, set 3Way Trigger to “ON.”
Value Explanation
OFF, ON
Enable/disable separate triggering of bow/
bell/edge strikes on the ride cymbal
Playing bow, bell, and edge (3Way Trigger)
Playing method TD-30 trigger input
Bow shot 10 RIDE (head)
Bell shot 10 RIDE (rim)
Edge shot 11 EDGE (rim)
* When “3Way Trigger” is set to “ON,” head-side tone for
the trigger input 11 EDGE cannot be sounded.
* When “3Way Trigger” is set to “ON,” “RD CTRL” is
displayed for the trigger type for trigger input 11
EDGE. It cannot be changed (p. 126).
Naming a Trigger Bank (NAME)
Each trigger bank can be named (up to 12 characters).
1. Select the trigger bank number you want to
name in the TRIGGER BANK screen (p. 126).
2. Press the [F5] (ADVANCE) button.
The TRIGGER ADVANCED screen will appear.
3. Press the [F5] (NAME) button.
The TRIG BANK NAME screen will appear.
4. Edit the name.
For details on how to edit a name, refer to “Assigning a
Name” (p. 29).
5. Press the [EXIT] button to return to the TRIGGER
ADVANCED screen.