User Manual

Visual Control
147
Making VISUAL CONTROL Settings
1. In the SETUP C screen (p. 114), press the
[F2] (V. CTRL) button.
The VISUAL CONTROL screen will appear.
2. Use the [–] [+] buttons or the dial to set the
parameters.
Parameter Value Explanation
Control Mode
MVC
Choose this if a video
device supporting MIDI
Visual Control is
connected.
V-LINK
Choose this if a video
device supporting V-LINK
is connected.
MIDI Ch CH1–CH16
The MIDI channel used to
switch images.
3. Press the [EXIT] button to return to the SETUP C
screen.
Using the Pad Pattern function to
control images
When playing pads to trigger patterns on the TD-30 (Pad
pattern function, p. 60), note number messages in the
pattern can be assigned to control images on an external
device that supports Visual Control.
Preset patterns 99 and 100 already have the following
note numbers assigned so they are already prepared for
using Visual Control to control images.
Pattern Note number Pattern Note number
99
7 Notes
36
100
12 Notes
36
38 37
40 38
41 39
43 40
45 41
47 42
43
44
45
46
47
MEMO
• “Backing parts” refer to the parts of a pattern other
than the drum kit part and the percussion part (p. 92).
• Set the pattern’s Play Type to “MVC” (p. 98).
• The performance data from the sequencer’s backing
parts is transmitted on the MIDI Ch.
AppendicesExpansionSettingsPerformanceSetupOverview