User Manual
Table Of Contents
- USING THE UNIT SAFELY
- IMPORTANT NOTES
- Contents
- Overview
- Setup
- Performance
- Drum Kit
- Instrument
- Mixer
- Effects
- Tempo
- Song Player
- Pattern Sequencer
- Settings
- Backing Up the Settings
- Data saved in USB flash drive
- Backing Up All Data to a USB Flash Drive (SAVE)
- Loading Backup Data from a USB Flash Drive (LOAD)
- Importing Kit Data from TD-20/TD-20X Backup Data (IMPORT)
- Deleting Backup Data from a USB Flash Drive (DELETE)
- Backing Up a Drum Kit to a USB Flash Drive (KITSAVE)
- Loading Kit Data from a USB Flash Drive (KITLOAD)
- Checking the State of a USB Flash Drive (INFO)
- Formatting a USB Flash Drive (FORMAT)
- Overall Settings for the TD-30 (SETUP)
- Output Assignments (OUTPUT)
- Assigning a Function to a Footswitch or Pad (CONTROL)
- Other Settings (OPTION)
- Restoring the Factory Settings (F RESET)
- Playing a Kit from the USB Flash Drive Without Loading It (Kit Selection) (KIT SEL)
- Digital Audio Level (GAIN)
- Auto Off Function (AUTOOFF)
- Viewing the Remaining Memory and the Program Version (INFO)
- Trigger Settings
- Backing Up the Settings
- Expansion
- Appendices
36
Mounting the TD-30 on the Stand
Here’s how to attach the TD-30 to a drum stand (separately sold: MDS series).
NOTE
928
When turning the unit upside down, position stacks of magazines (or other materials) under the unit in such a way that
they will support its four corners, thus preventing damage to the buttons, knobs, etc. Also, be sure to handle the unit with
care so as to avoid dropping it, or allowing it to fall or tip over.
1. Attach the sound module mounting plate (included with the sold separately drum stand) to the TD-30.
* ONLY use the screws on the bottom panel of the TD-30. Other screws may damage the unit.
Sound module mounting plate
Wide
Narrow
2. Mount the TD-30 and sound module mounting plate to the drum stand (sold separately: MDS series).
See the owner’s manual for the stand for details on assembling the drum stand and mounting the TD-30.
MEMO
The All Purpose Clamp (sold separately: APC-33) can be attached to a pipe of 10.5–28.6 mm radius in case you want to
mount the TD-30 on a cymbal stand or other such stand.