User Manual
Table Of Contents
- USING THE UNIT SAFELY
- IMPORTANT NOTES
- Contents
- Overview
- Setup
- Performance
- Drum Kit
- Instrument
- Mixer
- Effects
- Tempo
- Song Player
- Pattern Sequencer
- Settings
- Backing Up the Settings
- Data saved in USB flash drive
- Backing Up All Data to a USB Flash Drive (SAVE)
- Loading Backup Data from a USB Flash Drive (LOAD)
- Importing Kit Data from TD-20/TD-20X Backup Data (IMPORT)
- Deleting Backup Data from a USB Flash Drive (DELETE)
- Backing Up a Drum Kit to a USB Flash Drive (KITSAVE)
- Loading Kit Data from a USB Flash Drive (KITLOAD)
- Checking the State of a USB Flash Drive (INFO)
- Formatting a USB Flash Drive (FORMAT)
- Overall Settings for the TD-30 (SETUP)
- Output Assignments (OUTPUT)
- Assigning a Function to a Footswitch or Pad (CONTROL)
- Other Settings (OPTION)
- Restoring the Factory Settings (F RESET)
- Playing a Kit from the USB Flash Drive Without Loading It (Kit Selection) (KIT SEL)
- Digital Audio Level (GAIN)
- Auto Off Function (AUTOOFF)
- Viewing the Remaining Memory and the Program Version (INFO)
- Trigger Settings
- Backing Up the Settings
- Expansion
- Appendices
Adjusting the Hi-Hat and Mesh Pads
41
6. While reading the meter displayed on the right side of the TD-30’s screen, adjust the oset with the VH-11’s
VH oset adjustment screw.
Adjust the oset so that the appear in the meter.
MEMO
If you need, make further adjustments to the parameters, refer to “Hi-Hat Settings (HI-HAT)” (p. 128).
Adjusting Mesh Head Tension
Before playing you must adjust the mesh pad tension rst.
You can tune/adjust the head tension as you would with an acoustic drum, to get the same dynamic “feel.”
* The pad will function at it’s best if you are sure to:
• Adjust the head evenly so that it does not sag.
• Adjust the tuning bolts so that they are not loose.
1. Adjust each tuning bolt little by little, across the head as indicated in the illustration.
12
3
4
5
6
* Fully tightening a tuning bolt at only a single location produces uneven tensioning, and correct playing dynamics may not
be achieved. Even tuning/tensioning is very important.
2. Adjust the tightness of each tuning bolt so that the head is tensioned evenly.
MEMO
• Head tension will not aect the actual tuning of the sound you are playing. For that you need to adjust sound parameters
in the sound module you are using. For details, refer to “Editing an Instrument’s Settings (EDIT)” (p. 56).
• Head tension will not aect the actual tuning of the sound you are playing. For that you need to adjust sound parameters
in the sound module you are using. Also, head tension may change depending on usage. Adjust as needed.
AppendicesExpansionSettingsPerformanceSetupOverview