User Manual

Drum Kit
50
5. Press the [F4] (EXCHNG) or [F5] (COPY) button.
A conrmation message will appear.
(Example: Copying a user memory drum kit)
If you selected [F1] (USER) in step 3, you can exchange
the copy-source and copy-destination by pressing the
[F4] (EXCHNG) button.
Press the [F5] (COPY) button to execute the copy.
If you decide to cancel the copy or exchange, press the
[F1] (CANCEL) button.
6. Press the [F5] (EXECUTE) button.
The drum kit will copied.
Copying Fifty Drum Kits at a Time
You can copy fty drum kits in a single operation.
Proceed as described in “Copying a drum kit,” but change
steps 2 as follows.
In step 2, choose [F4] (50 KITS).
Copying TD-20/TD-20X Drum Kits
Here's how to copy a kit from TD-20, TD-20X, or TDW-20
backup data.
1. Find the backup data that you want to copy, and
copy it to your USB ash drive (p. 110).
2. Connect your USB ash drive to the TD-30’s USB
MEMORY port (p. 85).
3. Hold down the [SHIFT] button and press the
[USB MEM] button.
[USB MEM] button will light, and the COPY A screen will
appear.
4. Press the [F5] (A B C) button twice to access the
COPY C screen.
5. Press the [F4] (IMPORT) button.
The COPY KIT (IMPORT) screen will appear.
6. Press the [F1] (TD-20) button or the [F2] (TD-20X)
button to specify the type of backup data.
Button Explanation
[F1] (TD-20) button TD-20 backup data will be copied.
[F2] (TD-20X) button
TD-20X or TDW-20 backup data will
be copied.
(Example: When [F1] (TD-20X) is selected)
7. Use the cursor buttons, [–] [+] buttons, and dial
to specify the copy-source and copy-destination.
Copy-source
Copy-destination
8. Press the [F5] (COPY) button.
A conrmation message will appear.
If you decide to cancel, press the [F1] (CANCEL) button.
9. Press the [F5] (EXECUTE) button.
The kit data will be copied from the USB ash drive.
MEMO
Pad pattern settings and multi-eect settings are not
copied. Make these settings as necessary.