User Manual
Table Of Contents
- USING THE UNIT SAFELY
- IMPORTANT NOTES
- Contents
- Overview
- Setup
- Performance
- Drum Kit
- Instrument
- Mixer
- Effects
- Tempo
- Song Player
- Pattern Sequencer
- Settings
- Backing Up the Settings
- Data saved in USB flash drive
- Backing Up All Data to a USB Flash Drive (SAVE)
- Loading Backup Data from a USB Flash Drive (LOAD)
- Importing Kit Data from TD-20/TD-20X Backup Data (IMPORT)
- Deleting Backup Data from a USB Flash Drive (DELETE)
- Backing Up a Drum Kit to a USB Flash Drive (KITSAVE)
- Loading Kit Data from a USB Flash Drive (KITLOAD)
- Checking the State of a USB Flash Drive (INFO)
- Formatting a USB Flash Drive (FORMAT)
- Overall Settings for the TD-30 (SETUP)
- Output Assignments (OUTPUT)
- Assigning a Function to a Footswitch or Pad (CONTROL)
- Other Settings (OPTION)
- Restoring the Factory Settings (F RESET)
- Playing a Kit from the USB Flash Drive Without Loading It (Kit Selection) (KIT SEL)
- Digital Audio Level (GAIN)
- Auto Off Function (AUTOOFF)
- Viewing the Remaining Memory and the Program Version (INFO)
- Trigger Settings
- Backing Up the Settings
- Expansion
- Appendices
Instrument
55
The indication below the
instrument name
If you turn the [F5] (H&R) button o, the following
information will be shown below the instrument
name. You’ll be able to obtain the eects that are
shown.
Display Explanation
POSI
The tone will change according
to the striking position. For a
rim sound, the tone will change
depending on the depth at which
the stick strikes the rim.
Use the Position Ctrl setting to turn
this eect on/o. You can specify
this only for specic trigger inputs
(p. 61).
INTRVL
Smoothes the interval between
notes according to the perfor-
mance technique used, such as a
roll or am.
XSTK
If the cross-stick switch is on (p. 49),
you’ll be able to play rim shots and
cross-stick separately.
Choosing a Pad to Edit
There are two basic ways to select the pad you want to
edit.
Choose by hitting a pad
1. Press the [INST] button.
The [INST] button will light, and the INST screen will
appear.
2. Strike a pad.
The settings screen for the struck pad appears.
To select a pad’s rim, strike the rim.
Choose with the TRIG SELECT buttons
1. Press the [INST] button.
The [INST] button will light, and the INST screen will
appear.
2. Press the [1] or [15] button to select the pad (the
trigger input number).
The trigger input number is indicated in the upper part
of the screen.
3. Press the [RIM] button to select the head or rim.
[RIM] button Explanation
Unlit Head is selected.
Lit Rim is selected.
MEMO
When MIDI note number corresponding to a pad is
received, the pad is selected and shown in the screen.
Lock the Pad You Are Editing
(Trigger Lock)
If you want to hear your editing in the context of your
performance, you can prevent the edited pad from being
switched when you play.
1. Select the pad to be locked.
The settings screen for the pad appears.
2. Press the [LOCK] button to make it light.
The pad is locked and other pads cannot be selected.
3. To release the lock, press the [LOCK] button to
make it go o.
MEMO
You can change the pad to be edited by pressing
the TRIG SELECT [1] or [15] button even if the [LOCK]
button is lit.
AppendicesExpansionSettingsPerformanceSetupOverview