User Manual

Instrument
57
The edit screens for each pad
(INST EDIT screen)
KICK
Parameter Value Explanation
[F1] (SHELL) button
Shell Depth
NORMAL,
DEEP1–2
Depth of the shell
Beater Type
FELT, WOOD,
PLASTIC
Type of beater
[F2] (HEAD) button
Head Type
CLEAR, COATED,
PINSTRIPE
Type of head
Head Tuning -480–+480 Tuning of the head
[F3] (MUFFLE) button
Muing
OFF, TAPE1–2,
BLANKET, WEIGHT
Muing (muting) setting
Snare Buzz OFF, 1–8 Resonance to the snare
[F4] (MIC/RES) button
Mic Position
OUTSIDE4–1,
STANDARD,
INSIDE1–4
Tonal change caused by
microphone position
Mic Size NORMAL, LARGE
Emphasizes the
low-frequency portion of
the attack
Kit Resonance OFF, 1–8
Amount of resonance for
the entire drum kit
SNARE
Parameter Value Explanation
[F1] (SHELL) button
Material
WOOD, STEEL,
BRASS
Material of the shell
Shell Depth 1.0"–20.0" Depth of the shell
[F2] (HEAD) button
Head Type
CLEAR, COATED,
PINSTRIPE
Type of head
Head Tuning -480–+480 Tuning of the head
[F3] (MUFFLE) button
Muing
OFF, TAPE1–2,
DOUGHNUTS1–2
Muing (muting) setting
Strainer Adj.
OFF, LOOSE,
MEDIUM, TIGHT
Tension of the strainer
(resonating cords)
[F4] (MIC/ADD) button
Mic Position
OUTSIDE4–1,
STANDARD,
INSIDE1–4
Tonal change caused by
microphone position
Add Rim
Sound
OFF, TAMB,
909 CLAPS,
GATE HIT
Sound added to the rim
shot sound
If this is “OFF,” only the rim
shot sound will be heard.
Level -3–+3
Adjusts the volume bal-
ance of the sound added
by “Add Rim Sound.”
* For some instruments, Material, Strainer Adj., and
Head Type cannot be edited.
* PINSTRIPE is a registered trademark of Remo Inc.,
U.S.A.
MEMO
You can assign the footswitch or a pad to turn o
the snare’s strainer (Strainer Adj. = OFF). Please refer
to “Assigning a Function to a Footswitch or Pad
(CONTROL)” (p. 117).
AppendicesExpansionSettingsPerformanceSetupOverview