User Manual
Table Of Contents
- USING THE UNIT SAFELY
- IMPORTANT NOTES
- Contents
- Overview
- Setup
- Performance
- Drum Kit
- Instrument
- Mixer
- Effects
- Tempo
- Song Player
- Pattern Sequencer
- Settings
- Backing Up the Settings
- Data saved in USB flash drive
- Backing Up All Data to a USB Flash Drive (SAVE)
- Loading Backup Data from a USB Flash Drive (LOAD)
- Importing Kit Data from TD-20/TD-20X Backup Data (IMPORT)
- Deleting Backup Data from a USB Flash Drive (DELETE)
- Backing Up a Drum Kit to a USB Flash Drive (KITSAVE)
- Loading Kit Data from a USB Flash Drive (KITLOAD)
- Checking the State of a USB Flash Drive (INFO)
- Formatting a USB Flash Drive (FORMAT)
- Overall Settings for the TD-30 (SETUP)
- Output Assignments (OUTPUT)
- Assigning a Function to a Footswitch or Pad (CONTROL)
- Other Settings (OPTION)
- Restoring the Factory Settings (F RESET)
- Playing a Kit from the USB Flash Drive Without Loading It (Kit Selection) (KIT SEL)
- Digital Audio Level (GAIN)
- Auto Off Function (AUTOOFF)
- Viewing the Remaining Memory and the Program Version (INFO)
- Trigger Settings
- Backing Up the Settings
- Expansion
- Appendices
Instrument
63
Copying an Instrument
You can copy an instrument from preset memory or from
a USB ash drive.
When copying an instrument, you can choose whether
to include the Pad Compressor and Pad EQ settings (p. 68).
For user memory, you can rearrange the data by
exchanging the copy-source and copy-destination
instruments.
NOTE
When you execute the copy, the contents of the
copy-destination will be overwritten. If you want
to keep those settings, back them up to a USB ash
drive before you continue (p. 108).
1. Hold down the [SHIFT] button and press the
[USB MEM] button.
[USB MEM] button will light, and the COPY A screen will
appear.
2. Press the [F2] (INST) button.
Copy-source
Copy-destination
3. Use the [F1]–[F3] buttons to select the copy-
source.
Button Explanation
[F1] (USER) button
Copy from user memory.
Exchanging the copy-source and
copy-destination is possible only if
the copy-source is user memory.
[F2] (PRESET) button
Copy from preset memory.
You can choose from TD-30 or TD-
20X preset data. Select this if you
want to return to the factory-set
settings.
[F3] (USB) button
Copy from backup data saved on a
USB ash drive.
4. Use the cursor buttons, [–] [+] buttons, and dial
to specify the copy-source and copy-destination.
If you selected [F2] (PRESET) in step 3, specify whether
you’re copying from TD-30 or from TD-20X.
If you selected [F3] (USB) in step 3, select the copy-source
backup number.
5. Use the cursor buttons, [–] [+] buttons, and dial
to select the copied content (Copy Target).
Value Explanation
with Pad Comp/EQ
The pad’s instrument settings
(Instrument, V-Edit), Pad Compres-
sor, and Pad EQ settings (p. 68) will
be copied.
Inst/VEdit Only
Only the pad’s instrument settings
(Instrument, V-Edit) will be copied.
Pad Comp/EQ Only
Only the Pad Compressor and Pad
EQ settings (p. 68) will be copied.
6. Press the [F4] (EXCHNG) button or [F5] (COPY)
button.
A conrmation message will appear.
(Example: Copying an instrument from a USB ash drive)
If you selected [F1] (USER) in step 3, you can exchange
the copy-source and copy-destination by pressing the
[F4] (EXCHNG) button.
Press the [F5] (COPY) button to execute the copy.
If you decide to cancel the copy or exchange, press the
[F1] (CANCEL) button.
7. Press the [F5] (EXECUTE) button.
The instrument will copied.
AppendicesExpansionSettingsPerformanceSetupOverview