User Manual
Table Of Contents
- USING THE UNIT SAFELY
- IMPORTANT NOTES
- Contents
- Overview
- Setup
- Performance
- Drum Kit
- Instrument
- Mixer
- Effects
- Tempo
- Song Player
- Pattern Sequencer
- Settings
- Backing Up the Settings
- Data saved in USB flash drive
- Backing Up All Data to a USB Flash Drive (SAVE)
- Loading Backup Data from a USB Flash Drive (LOAD)
- Importing Kit Data from TD-20/TD-20X Backup Data (IMPORT)
- Deleting Backup Data from a USB Flash Drive (DELETE)
- Backing Up a Drum Kit to a USB Flash Drive (KITSAVE)
- Loading Kit Data from a USB Flash Drive (KITLOAD)
- Checking the State of a USB Flash Drive (INFO)
- Formatting a USB Flash Drive (FORMAT)
- Overall Settings for the TD-30 (SETUP)
- Output Assignments (OUTPUT)
- Assigning a Function to a Footswitch or Pad (CONTROL)
- Other Settings (OPTION)
- Restoring the Factory Settings (F RESET)
- Playing a Kit from the USB Flash Drive Without Loading It (Kit Selection) (KIT SEL)
- Digital Audio Level (GAIN)
- Auto Off Function (AUTOOFF)
- Viewing the Remaining Memory and the Program Version (INFO)
- Trigger Settings
- Backing Up the Settings
- Expansion
- Appendices
Mixer
66
Copying Mixer Settings
The drum kit mixer’s VOLUME (volume of each pad) and
PAN (stereo position of each pad) settings can be copied
to another drum kit in a single operation. You can also
copy from a drum kit in preset memory or a USB ash
drive.
If you’re copying from user memory, you can exchange
the copy-source and copy-destination settings.
NOTE
When you execute the copy, the contents of the
copy-destination will be overwritten. If you want
to keep those settings, back them up to a USB ash
drive before you continue (p. 108).
1. Hold down the [SHIFT] button and press the
[USB MEM] button.
[USB MEM] button will light, and the COPY A screen will
appear.
2. Press the [F5] (A B C) button to access the
COPY B screen.
3. Press the [F1] (VOLUME) or [F2] (PAN) button to
select the settings that you want to copy.
(Example: When [F1] (VOLUME) is selected)
4. Use the [F1]–[F3] buttons to select the copy-
source.
Button Explanation
[F1] (USER) button
Copy from user memory.
Exchanging the copy-source and
copy-destination is possible only if
the copy-source is user memory.
[F2] (PRESET) button
Copy from preset memory.
You can choose from TD-30 or TD-
20X preset data. Select this if you
want to return to the factory-set
settings
[F3] (USB) button
Copy from backup data saved on a
USB ash drive
5. Use the cursor buttons, [–] [+] buttons, and dial
to specify the copy-source and copy-destination.
If you selected [F2] (PRESET) in step 4, specify whether
you’re copying from TD-30 or from TD-20X.
If you selected [F3] (USB) in step 4, select the copy-source
backup number.
6. Press the [F4] (EXCHNG) or [F5] (COPY) button.
A conrmation message will appear.
(Example: Copying a user memory mixer settings)
If you selected [F1] (USER) in step 4, you can exchange
the copy-source and copy-destination by pressing the
[F4] (EXCHNG) button.
Press the [F5] (COPY) button to execute the copy.
If you decide to cancel the copy or exchange, press the
[F1] (CANCEL) button.
7. [F5] (EXECUTE) button.
The mixer settings will be copied.