User Manual
Table Of Contents
- USING THE UNIT SAFELY
- IMPORTANT NOTES
- Contents
- Overview
- Setup
- Performance
- Drum Kit
- Instrument
- Mixer
- Effects
- Tempo
- Song Player
- Pattern Sequencer
- Settings
- Backing Up the Settings
- Data saved in USB flash drive
- Backing Up All Data to a USB Flash Drive (SAVE)
- Loading Backup Data from a USB Flash Drive (LOAD)
- Importing Kit Data from TD-20/TD-20X Backup Data (IMPORT)
- Deleting Backup Data from a USB Flash Drive (DELETE)
- Backing Up a Drum Kit to a USB Flash Drive (KITSAVE)
- Loading Kit Data from a USB Flash Drive (KITLOAD)
- Checking the State of a USB Flash Drive (INFO)
- Formatting a USB Flash Drive (FORMAT)
- Overall Settings for the TD-30 (SETUP)
- Output Assignments (OUTPUT)
- Assigning a Function to a Footswitch or Pad (CONTROL)
- Other Settings (OPTION)
- Restoring the Factory Settings (F RESET)
- Playing a Kit from the USB Flash Drive Without Loading It (Kit Selection) (KIT SEL)
- Digital Audio Level (GAIN)
- Auto Off Function (AUTOOFF)
- Viewing the Remaining Memory and the Program Version (INFO)
- Trigger Settings
- Backing Up the Settings
- Expansion
- Appendices
67
The TD-30 provides the following eects, and allows you
to make detailed settings for each eect.
Eect Explanation
PAD COMPRESSOR/
PAD EQ
These are a compressor and
equalizer that can be specied for
each pad (p. 68).
AMBIENCE SECTION
This simulates the acoustics or
reverberation of the location in
which you’re playing the drums.
These settings are made for each
drum kit; you can specify the
amount of the eect that will be
applied to each pad (p. 69).
MULTI EFFECTS
Here you can choose one of 21
dierent eects.
These settings are made for each
drum kit; you can specify the
amount of the eect that will be
applied to each pad (p. 71).
MASTER COMPRESSOR/
MASTER EQ
These are a compressor and equal-
izer that are applied to the nal
output of the sound. These settings
apply to each drum kit (p. 78).
MEMO
See also the section “Eects” (p. 18) in “Overview of the
TD-30.”
Turning Eects On/O
These switches allow you to turn the eects on/o within
each drum kit.
1. Hold down the [SHIFT] button and press the
[MASTER COMP] button.
The [MASTER COMP] button will light, EFFECTS SWITCH
screen will appear.
2. Press the function buttons to turn the following
on/o.
Button Explanation
[F1] button Turns the pad compressor on/o.
[F2] button Turns the pad equalizer on/o.
[F3] button Turns the ambience section on/o.
[F4] button Turns the multi-eects on/o.
[F5] button
Turns the master compressor/
master EQ on/o.
3. Press the [KIT] button to return to the DRUM KIT
screen.
The on/o status of each eect is shown in the DRUM KIT
screen.
Eect on/o status
Example: EQ setting
: On
: O
Eects
AppendicesExpansionSettingsPerformanceSetupOverview