User Manual

Eects
69
About Threshold and Ratio
As shown in the diagram below, these parameters
determine how the volume is to be compressed.
Output Level
Input Level
Threshold
Ratio
0.5:1
1:1
1.7:1
4:1
50:1
Adjusting the Tone (EQ)
You can use the three-band graphic equalizer (LOW/MID/
HIGH) to adjust individual sounds.
Parameter Value Explanation
Q
0.5–8.0
(only for MID)
Width of the frequency
range
A higher Q narrows the
aected area.
Freq
(Frequency)
20–1k (LOW),
20–8k (MID),
1k–8k (HIGH)
Center frequency
Gain -15–+15 dB Amount of boost/cut
Simulating the Acoustics
of a Performing Location
(AMBIENCE SECTION)
Here you can modify the actual acoustics of the space in
which you’re playing the drums.
A wide variety of parameters to work with include,
overhead mic and room mic positioning, wall material,
“type” of room, reverb etc.
1. Press the [AMBIENCE] button.
[AMBIENCE] button will light, and the AMBIENCE
SECTION screen will appear.
Button Explanation
[F1] button
Turns the eect when using
overhead mics on/o.
[F2] button
Turns the ambience eect of the
room on/o.
[F3] button Turns the reverb eect on/o.
[F4] (AMB ONLY) button Auditions the ambience eect (p. 71).
[F5] (EDIT) button Edits the ambience settings.
AppendicesExpansionSettingsPerformanceSetupOverview