User Manual

Eects
71
Turning ambience on/o
Here’s how to turn the various ambience eects on/o.
1. Press the [AMBIENCE] button.
The [AMBIENCE] button will light, and the AMBIENCE
SECTION screen will appear.
2. Press the [F1]–[F3] buttons to turn each eect
on/o.
Button Explanation
[F1] button
Adjusts the position of the
overhead mics.
[F2] button
Edits the ambience of the room in
which you’re performing.
[F3] button Edits the reverb settings.
MEMO
The settings of the ambience section can be turned
on/o together (p. 67).
Auditioning the Ambience Eect
(AMB ONLY)
In the AMBIENCE SECTION screen, pressing the [F4] (AMB
ONLY) button will cause only the sound processed by
ambience to be output from the MASTER OUT jacks and
the PHONES jack. This is a convenient way to audition the
eect while you’re editing.
You can also audition the ambience eect from an
editing screen (OVERHEAD MICS, ROOM, REVERB screens)
by holding down the [SHIFT] button and pressing the
[F4] button.
This function will be cancelled automatically when you
access a dierent screen.
Applying Eects to the Sound
(MULTI EFFECTS)
Here you can apply various eects, such as adding depth
and spaciousness to the sound or shifting the pitch.
The TD-30 provides the following 21 types of eect.
Type Page Type Page
STEREO DELAY p. 73 FILTER+DRIVE p. 75
REVERSE DELAY p. 73 AUTO WAH p. 76
TAPE ECHO p. 73 LO-FI COMPRESS p. 76
CHORUS p. 73 DISTORTION p. 76
PHASER p. 73 OVERDRIVE p. 76
STEP PHASER p. 74 ISOLATOR p. 76
FLANGER p. 74 RING MODULATOR p. 77
REVERB p. 74 STEP RINGMOD p. 77
LONG REVERB p. 75 PITCH SHIFT p. 77
SATURATOR p. 75 AUTO PAN p. 77
SUPER FILTER p. 75
Editing the Multi-Eect
1. Press the [MULTI EFFECTS] button.
[MULTI EFFECTS] button will light, and the MULTI
EFFECTS screen will appear.
2. Use the [F2]–[F4] buttons and the cursor buttons
to select a parameter.
AppendicesExpansionSettingsPerformanceSetupOverview