User Manual
Table Of Contents
- USING THE UNIT SAFELY
- IMPORTANT NOTES
- Contents
- Overview
- Setup
- Performance
- Drum Kit
- Instrument
- Mixer
- Effects
- Tempo
- Song Player
- Pattern Sequencer
- Settings
- Backing Up the Settings
- Data saved in USB flash drive
- Backing Up All Data to a USB Flash Drive (SAVE)
- Loading Backup Data from a USB Flash Drive (LOAD)
- Importing Kit Data from TD-20/TD-20X Backup Data (IMPORT)
- Deleting Backup Data from a USB Flash Drive (DELETE)
- Backing Up a Drum Kit to a USB Flash Drive (KITSAVE)
- Loading Kit Data from a USB Flash Drive (KITLOAD)
- Checking the State of a USB Flash Drive (INFO)
- Formatting a USB Flash Drive (FORMAT)
- Overall Settings for the TD-30 (SETUP)
- Output Assignments (OUTPUT)
- Assigning a Function to a Footswitch or Pad (CONTROL)
- Other Settings (OPTION)
- Restoring the Factory Settings (F RESET)
- Playing a Kit from the USB Flash Drive Without Loading It (Kit Selection) (KIT SEL)
- Digital Audio Level (GAIN)
- Auto Off Function (AUTOOFF)
- Viewing the Remaining Memory and the Program Version (INFO)
- Trigger Settings
- Backing Up the Settings
- Expansion
- Appendices
81
Here you can make settings for the tempo and click.
Specifying the Tempo
1. Press the [TEMPO] button.
The [TEMPO] button will light, and the TEMPO screen will
appear.
Button Explanation
[F1] (CLICK) button Make click settings (p. 82).
[F2] (SYNC) button
Specify synchronization with
external MIDI devices (p. 84).
[F3] (TAP) button
Specify the tempo by striking a pad
or button.
[F4] button
Make the [TEMPO] button blink in
time with the tempo (p. 82).
[F5] button Sound the click (p. 82).
2. Use the [–] [+] buttons or the dial to select the
tempo.
Value 20–260
4. Press the [EXIT] button to return to the DRUM
KIT screen.
Setting the Tempo by Hitting a
Pad (TAP)
You can set the tempo by hitting a pad or the [PREVIEW]
button two or more times at quarter-note intervals of the
desired tempo.
1. Press the [TEMPO] button.
The [TEMPO] button will light, and the TEMPO screen will
appear.
2. Press the [F3] (TAP) button.
The TAP TEMPO screen will appear.
3. Press the cursor [ ] button to move the cursor
to Tap Switch.
4. Use the [–] [+] buttons or the dial to set to “ON.”
5. Press the cursor [ ] button to move the cursor
to Tap Pad.
6. Use the [–] [+] buttons or the dial to select the
pad (or the [PREVIEW] button) to use for Tap
Tempo function.
7. Press the [EXIT] button to return to the TEMPO
screen.
When you strike the pad selected in step 6 (or the
[PREVIEW] button) two or more times, the tempo will
change to the corresponding interval.
Tempo
AppendicesExpansionSettingsPerformanceSetupOverview