User Manual
Table Of Contents
- USING THE UNIT SAFELY
- IMPORTANT NOTES
- Contents
- Overview
- Setup
- Performance
- Drum Kit
- Instrument
- Mixer
- Effects
- Tempo
- Song Player
- Pattern Sequencer
- Settings
- Backing Up the Settings
- Data saved in USB flash drive
- Backing Up All Data to a USB Flash Drive (SAVE)
- Loading Backup Data from a USB Flash Drive (LOAD)
- Importing Kit Data from TD-20/TD-20X Backup Data (IMPORT)
- Deleting Backup Data from a USB Flash Drive (DELETE)
- Backing Up a Drum Kit to a USB Flash Drive (KITSAVE)
- Loading Kit Data from a USB Flash Drive (KITLOAD)
- Checking the State of a USB Flash Drive (INFO)
- Formatting a USB Flash Drive (FORMAT)
- Overall Settings for the TD-30 (SETUP)
- Output Assignments (OUTPUT)
- Assigning a Function to a Footswitch or Pad (CONTROL)
- Other Settings (OPTION)
- Restoring the Factory Settings (F RESET)
- Playing a Kit from the USB Flash Drive Without Loading It (Kit Selection) (KIT SEL)
- Digital Audio Level (GAIN)
- Auto Off Function (AUTOOFF)
- Viewing the Remaining Memory and the Program Version (INFO)
- Trigger Settings
- Backing Up the Settings
- Expansion
- Appendices
Pattern Sequencer
92
Muting a Specic Part (MUTE)
You can mute specic parts in patterns.
1. In the PATTERN PART screen (p. 91), press the [F1]
(MUTE) button.
PART MUTE screen will appear.
2. Press the [F1]–[F5] buttons to turn each part
muted or played.
Button Explanation
[F1] button Melody part
[F2] button Bass part
[F3] button Backing 1 part + Backing 2 part
[F4] button Percussion part
[F5] button Drum Kit part
3. Press the [EXIT] button to return to the PATTERN
PART screen.
MEMO
You can check the part mute status in the PATTERN
screen.
MUTE PLAY
Display Explanation
MELO Melody part
BASS Bass part
BK1&2 Backing 1 part + Backing 2 part
PERC Percussion part
DRUM Drum Kit part
Specifying the Instruments for the
Backing Parts (BACKING)
Here’s how to select the instruments to be used by
backing parts (Melody Part, Bass Part, Backing 1 Part,
and Backing 2 Part), and make settings for the Key Shift
(change pitch in semitone steps).
1. In the PATTERN PART screen (p. 91), press the [F2]
(BACKING) button.
The part setting screen will appear.
2. Press the [F1]–[F4] buttons to select the part you
wish to set.
Button Explanation
[F1] (MELODY) button Melody part
[F2] (BASS) button Bass part
[F3] (BACK1) button Backing 1 part
[F4] (BACK2) button Backing 2 part
3. Use the cursor [ ] [ ] buttons to select the
parameter.
4. Use the [–] [+] buttons or the dial to make
settings.
Parameter Value Explanation
Inst Part Instrument
Key Shift -24–0–+24
Shifts the overall pitch (in
semitone steps).
Bend Range 0–+24
Amount of change in
pitch with pitch bend at
the maximum level (in
semitone steps).
5. Press the [EXIT] button to return to the PATTERN
PART screen.