User Manual
Table Of Contents
- USING THE UNIT SAFELY
- IMPORTANT NOTES
- Contents
- Overview
- Setup
- Performance
- Drum Kit
- Instrument
- Mixer
- Effects
- Tempo
- Song Player
- Pattern Sequencer
- Settings
- Backing Up the Settings
- Data saved in USB flash drive
- Backing Up All Data to a USB Flash Drive (SAVE)
- Loading Backup Data from a USB Flash Drive (LOAD)
- Importing Kit Data from TD-20/TD-20X Backup Data (IMPORT)
- Deleting Backup Data from a USB Flash Drive (DELETE)
- Backing Up a Drum Kit to a USB Flash Drive (KITSAVE)
- Loading Kit Data from a USB Flash Drive (KITLOAD)
- Checking the State of a USB Flash Drive (INFO)
- Formatting a USB Flash Drive (FORMAT)
- Overall Settings for the TD-30 (SETUP)
- Output Assignments (OUTPUT)
- Assigning a Function to a Footswitch or Pad (CONTROL)
- Other Settings (OPTION)
- Restoring the Factory Settings (F RESET)
- Playing a Kit from the USB Flash Drive Without Loading It (Kit Selection) (KIT SEL)
- Digital Audio Level (GAIN)
- Auto Off Function (AUTOOFF)
- Viewing the Remaining Memory and the Program Version (INFO)
- Trigger Settings
- Backing Up the Settings
- Expansion
- Appendices
Pattern Sequencer
95
Naming a percussion set (NAME)
The percussion set can be named (up to 12 characters).
1. In the PERCUSSION SET EDIT screen (p. 94), press
the [F2] (NAME) button.
The PERCUSSION SET NAME screen will appear.
2. Edit the name.
For details on how to edit a name, refer to “Assigning a
Name” (p. 29).
3. Press the [EXIT] button to return to the
PERCUSSION SET EDIT screen.
Copying a percussion set
You can copy a percussion set from preset memory or
from a USB ash drive.
For user memory, you can rearrange the data by
exchanging the copy-source and copy-destination
percussion sets.
NOTE
When you execute the copy, the contents of the
copy-destination will be overwritten. If you want to
keep those settings, back them up to a USB ash drive
before you continue (p. 108).
1. Hold down the [SHIFT] button and press the
[USB MEM] button.
[USB MEM] button will light, and the COPY A screen will
appear.
2. Press the [F5] (A B C) button twice to access the
COPY C screen.
3. Press the [F3] (PERC) button.
Copy-source
Copy-destination
4. Use the [F1]–[F3] buttons to select the copy-
source.
Button Explanation
[F1] (USER) button
Copy from user memory.
Exchanging the copy-source and
copy-destination is possible only if
the copy-source is user memory.
[F2] (PRESET) button
Copy from preset memory.
Choose this when you want to
revert to the factory settings.
[F3] (USB) button
Copy from backup data saved on a
USB ash drive.
5. Use the cursor buttons, [–] [+] buttons, and dial
to specify the copy-source and copy-destination.
If you selected [F3] (USB) in step 4, select the copy-source
backup number.
6. Press the [F4] (EXCHNG) or [F5] (COPY) button.
A conrmation message will appear.
(Example: Copying settings from a USB ash drive)
If you selected [F1] (USER) in step 3, you can exchange
the copy-source and copy-destination by pressing the
[F4] (EXCHNG) button.
Press the [F5] (COPY) button to execute the copy.
If you decide to cancel the copy or exchange, press the
[F1] (CANCEL) button.
7. Press the [F5] (EXECUTE) button.
The percussion set will copied.
AppendicesExpansionSettingsPerformanceSetupOverview