Owner`s manual

32
Troubleshooting
Problem Conrmation Resolution
Sound played by
your computer is
inaudible or too
soft
Can you hear sound by connecting
headphones?
If you can hear sound through headphones
connected to the PHONES jack, check that you have
correctly connected your audio playback system
(external monitors), and adjust the volume of your
equipment.
If the sound in your headphones is inaudible or too
soft, check the other troubleshooting items.
Is the [PHONES] knob of the TRI-
CAPTURE turned down?
Use the TRI-CAPTURE’s [PHONES] knob to adjust
the volume.
Is the computer’s volume setting turned
down?
Adjust the computer’s volume setting (p. 39).
Are you using voice communication
software? (Windows 8/Windows 7)
Disable automatic volume adjustment (p. 40).
Is the driver’s audio buer size too small? Increase the buer size (p. 43).
Computer
playback sound is
“doubled”
Is the [REC MODE] button set to “LOOP
BACK”?
Set the [REC MODE] button to “MIC/GUITAR” or “ALL
INPUTS.”
Insucient
volume from your
microphone
Are you using the correct connector?
Connect your microphone with an XLR type plug to
the XLR type connector (INPUT 1 (MIC) jack) (p. 13)
Does the sensitivity of the microphone
match the nominal input level of the
TRI-CAPTURE?
The TRI-CAPTURE’s microphone nominal input level
is -60 dBu. If the sensitivity of the microphone is
low, the level will be low.
Also check the contents of “The volume
level of the instrument connected to
input connector is too low.” (p. 32)
Insucient
volume from your
guitar
Are you using the correct connector?
Connect your guitar to the INPUT 2 (GUITAR) jack
(p. 12).
Is the [Hi-Z] button set to “OFF”? Set the [Hi-Z] button to “ON” (p. 10).
Is the input level too low?
Use the [INPUT 2 (GUITAR)] knob to adjust the input
level (p. 11).
Could you be using a connection cable
that contains a resistor?
Use a connection cable that does not contain a
resistor.
Also check the contents of “The volume
level of the instrument connected to
input connector is too low.” (p. 32).
The volume level
of the instrument
connected to
input connector is
too low
Is the input level too low?
Turn the [INPUT 1 (MIC)], [INPUT 2 (GUITAR)], or
[INPUT 3 (AUX)] knob toward the right to increase
the input level (p. 11)
Could you be using a connection cable
that contains a resistor?
Use a connection cable that does not contain a
resistor.