Owner`s manual
44
Troubleshooting
Mac OS X
1. Open “System Preferences” and click “TRI-CAPTURE.”
The “Driver Settings” panel appears.
Setting Description
Audio Buer Size
You can adjust the driver’s input and output audio buer size.
Decrease the buer size to decrease latency. Increase the buer size if audio drops out.
* After adjusting the buer size, make sure to restart all programs that are using the
TRI-CAPTURE. If using software that has an “audio device test” function, run the test
function.
Recording Margin
If audio drops out or if noise is heard, even if you have adjusted the buer size setting
in the software and adjusted the “Audio Buer Size” as explained above, increase the
recording margin setting.
Recording Timing
Adjust this setting if the recorded audio data is not in time.
* If the audio software is running, the new setting will not be applied immediately
when [Apply] is clicked. Quit all audio software; The new setting will be applied the
next time you start the software.