Owner`s manual

Introduction
7
2
[SENS 1] knob, [SENS 2] knob
Adjust the volume of the audio signal that is input via the INPUT 1 jack and the INPUT 2 jack.
3
PEAK indicator
Lights up when the input signal level is too high. Use the [SENS 1] knob and the [SENS 2] knob to
adjust the input level so that the PEAK indicator does not light.
4
[OUTPUT] knob
Adjusts the volume that is output from the PHONES jack, OUTPUT L jack, and OUTPUT R jack.
5
PHONES jack
Used to connect headphones. This jack will output the same sound as the OUTPUT L and OUTPUT
R jacks. Even if headphones are connected, sound will be output from the OUTPUT L and OUTPUT
R jacks.
6
Power indicator ( )
Lights up while the DUO-CAPTURE EX’s power is on (p. 9).
Power indicator color Supplied power
Green Bus power or optional AC adaptor
Red Batteries
MEMO
• When operating this unit using batteries, the power indicator will blink when the batteries only
have enough power left for ve or fewer minutes of operation. Replace the batteries as soon as
possible.
• When using the optional AC adaptor, the DUO-CAPTURE EX will automatically be switched o
after 10 consecutive hours of no communication with the computer. The power indicator will
blink 5 minutes before the unit switches o automatically. After the unit switches o, turn the
power on if you want to use the DUO-CAPTURE EX again.