Owner`s manual

10
Macintosh Audio Applications CD-ROM
Edit menu:
Undo Cancel the effect of the previously executed command.
Redo Re-execute the previously cancelled command.
Cut Cut the selected region and copy it into the clipboard.
Paste Insert the data stored in the clipboard at the insertion point.
DSP menu:
Change Gain Increase or decrease the volume of the selected region.
Convert Sample Rate Convert the sample rate.
Invert Invert the amplitude (positive vs. negative) of the selected region.
Fade In/Out Gradually increase or decrease the volume of the selected region.
Normalize Normalize the waveform in the selected region. The level is adjusted in
accordance with the maximum values for volume.
Reverse Reverse the selected region of the waveform front-to-back.
■ Exiting Peak LE
To exit Peak LE, choose Exit from the File menu.
■ How to Register Peak LE
(Receiving the Product Authorization Code)
Peak LE must be authorized to work on your Macintosh. To authorize Peak LE, you will
need your Product Authorization Code in addition to the serial number that appears on top
of the Owner’s Manual. BIAS will provide you with your Product Authorization Code when
you register Peak LE. You must register Peak LE in order to obtain your Product
Authorization Code. If you don’t register Peak LE, it will not launch after the 14 day
registration period, and also you will not be eligible for technical support and you won’t be
notified about updates, upgrades and other important news from BIAS.
There are three ways to register the software:
(1) by e-mail
(2) by mailing the attached card
(3) by faxing the attached card
Register by e-mail
If you click [Register] button in step 8 of Installing Peak LE (p. 3), the following dialog
appears. Fill the dialog and click [Email Registration] button to send the information to
BIAS by mail. You can also click [Print to MAIL] button to print and send the form via FAX.
After the registration, you will receive your Product Authorization code in a few days. If you
will not receive the code after 14 days, please register Peak once again.
The CD-ROM contains an on-line manual which provides detailed explanations
concerning the use of Peak LE.
Location: Peak_LE\For_English\PeakManual.pdf
Adobe Acrobat Reader is required in order to read the on-line manual. To
install Adobe Acrobat Reader, run the following program on the CD-ROM.
Location: Peak_LE\For_English\AcrobatReader\Reader Installer