Owner`s manual
12
Steps to be performed on the UM-2EX itself are marked by a symbol.
1.
With the UM-2EX left unconnected, start up Windows.
Do not connect the UM-2EX to the computer until you reach Step 13 (p. 14).
* Disconnect all USB cables except for a USB keyboard and USB mouse (if used).
* Log onto Windows using a user name that has administrative privileges (such as Administrator).
2.
Open the
System Properties
dialog box.
Windows XP:
1.
Click the Windows
start
menu, and from the menu, select
Control Panel
.
2.
In
“Pick a category,”
click
“Performance and Maintenance.”
3.
In
“or pick a Control Panel icon,”
click the
System
icon.
Depending on your setup, the
System
icon may appear directly in the
Control Panel
(Classic
view). If so, double-click the
System
icon.
Windows 2000:
1.
Click the Windows
Start
menu, and from the menu that appears, select
Settings
|
Control
Panel
.
2.
In
Control Panel
, double-click the
System
icon.
3.
Click the
Hardware
tab, then click
[Driver Signing]
.
The
Driver Signing Options
dialog box will open.
4.
In the
Driver Signing Options
dialog box, select
“Ignore,”
then click
[OK]
.
If the current setting is “Warn” or “Block,” change this to
“Ignore.”
Then, when you’ve finished
installing the driver, change it back to the original setting.
Installing the Driver
Windows XP/2000 users
The installation procedure will differ depending on your system.
Please proceed to one of the following sections, depending on the system you use.
• Windows XP/2000 users..........................................................................................p. 12
• Windows Me/98 users.............................................................................................p. 17
Operation of the UM-2EX
UM-2EX_multi1.book 12 ページ ２００５年１１月１日 火曜日 午後３時４７分