Owner`s manual

■

OMS settings

If you are using FreeMIDI, proceed to

“FreeMIDI settings”

(p. 31).

Set the UM-2EX’s

ADVANCED (mode select) Switch

to the

position.

Connect the UM-2EX to your Macintosh.

* Connect the cable to the USB connector of the Macintosh itself, not to the USB connector of the keyboard.

* This unit is equipped with a protection circuit. A brief interval (a few seconds) after connecting the UM-

2EX is required before the unit will operate normally.

fig.3-3

From the CD-ROM, drag the

Driver E (Mac OS 9)

OMS Setting

folder into the

Opcode

OMS Applications

folder on the hard disk of your Macintosh to copy it

there.

fig.3-4

In the

Opcode

OMS Applications

folder where you installed OMS, double-click

OMS Setup

to start it up.

fig.3-5_35

If a dialog box like the one shown here appears,

click

[Turn It Off]

. A

confirmation

dialog box

will then appear, so click

[OK]

* We recommend that you

turn off

AppleTalk

, by

selecting Chooser from the Apple menu.

Operation of the UM-2EX

UM-2EX_multi1.book 28 ページ２００５年１１月１日　火曜日　午後３時４７分