Owner`s manual
31
■
FreeMIDI settings
1.
Set the UM-2EX’s
ADVANCED (mode select) Switch
to the
ON
position.
2.
Connect the UM-2EX to your Macintosh.
* Connect the cable to the USB connector of the Macintosh itself, not to the USB connector of the keyboard.
* This unit is equipped with a protection circuit. A brief interval (a few seconds) after connecting the UM-
2EX is required before the unit will operate normally.
3.
From the CD-ROM, drag the
Driver E (Mac OS 9)
-
FreeMIDI Setting
folder into the
FreeMIDI
Applications
folder on the hard disk of your Macintosh to copy it there.
4.
Open the
FreeMIDI Applications
folder from the location into which you installed
FreeMIDI
, and
double-click the
FreeMIDI Setup
icon to start it up.
When
“OMS is installed on this computer...”
appears, click
[FreeMIDI]
.
5.
The first time you start up, use the following procedure.
1.
A dialog box saying
“Welcome to FreeMIDI!”
will appear.
Click
[Continue]
.
2.
The
FreeMIDI Preferences
dialog box will appear.
Click
[Cancel]
.
3.
The
About Quick Setup
dialog box will appear.
Click
[Cancel]
.
6.
From the
File
menu, choose
Open
.
If you are unable to select
Open
, return to step 4 and continue the procedure.
1.
From the
File
menu, choose
FreeMIDI Preference
.
2.
Uncheck
“Use OMS when available.”
3.
Close FreeMIDI.
7.
Select
UM-2
from the
FreeMIDI Setting
folder you copied in
step 3
, and click
[Open]
.
8.
Verify that MIDI transmission and reception occur correctly.
From the
MIDI
menu, choose
Check Connections
.
Operation of the UM-2EX
Operation of the UM-2EX
UM-2EX_multi1.book 31 ページ ２００５年１１月１日 火曜日 午後３時４７分