Owner`s manual

If transmitting MIDI messages from the sequencer software to a MIDI sound module or digital

piano, or if using a MIDI sound module’s or digital piano’s sound generator to play the sounds

from the playback of sequencer software on the computer, make the following connections and

settings.

fig.connect-out_e

MIDI device setting

If you connected your device to the MIDI OUT 1 connector, specify

UM-2 MIDI 1

for

MIDI OUT

If you connected your device to the MIDI OUT 2 connector, specify

UM-2 MIDI 2

For more on how to make the settings, refer to

“Getting Connected and Installing Drivers”

(

Windows

: p. 11 /

Macintosh

: p. 21).

* If you are using sequencer software that does not utilize Windows or Macintosh standard device settings, make

the device settings within the sequencer software.

Transmitting MIDI Messages from the sequencer software to a

MIDI sound module or digital piano

MIDI Message Flow

MIDI messages are transmitted

from the sequencer software.

Connect to the

computer’s

USB connector.

Connect to the MIDI IN

connector of the MIDI sound

module or digital piano.

MIDI Sound Module

Digital Piano

MIDI OUT

UM-2EX_multi1.book 34 ページ２００５年１１月１日　火曜日　午後３時４７分