Owner`s manual
38
Did you make “Driver Signing Options”?
In order to install/re-install the driver, you must make the settings described in
“Driver Signing
Options”
(p. 12).
Did you connect the UM-2EX to a different USB connector than the one you used when
installing the driver?
If your computer or USB hub has two or more USB connectors, and you connect the UM-2EX to a
different USB connector, you may be asked for the driver file even though the driver has already
been installed in your computer. (Such a response does not indicate a malfunction.)
Proceed as follows to install the driver.
1.
Connect the UM-2EX to the computer.
Windows XP:
1.
The
Found New Hardware Wizard
dialog box will appear.
If the message
“Connect to Windows Update to search for software?”
appears, choose
“No”
and then click
[Next]
.
2.
Choose
“Search for the best driver in these locations”
and click
[Next]
.
If a dialog box with an
“!”
or
“x”
symbol will appear, click
[Continue Anyway]
to proceed with
the installation. If you are unable to continue, click
[OK]
and repeat the driver installation.
(
➔
“Installing the Driver”
(p. 12))
Windows 2000:
If a dialog box indicating
“Digital Signature Not Found”
will appear, click
[Yes]
to proceed
with the installation. If you are unable to continue, click
[OK]
and repeat the driver installation.
(
➔
“Installing the Driver”
(p. 12))
2.
The
Completing the Found New Hardware Wizard
dialog box will appear.
Click
[Finish]
.
3.
If the
Change System Settings
dialog box appears, click
[Yes]
. Windows will restart
automatically.
If you are unable to complete driver installation using the above method, repeat the driver
installation. (
➔
“Installing the Driver”
(p. 12))
Windows XP/2000 displays a “Hardware Installation” or “Digital
Signature Not Found” dialog box
You are asked to install the driver file even though you installed the driver
(Windows)
UM-2EX_multi1.book 38 ページ ２００５年１１月１日 火曜日 午後３時４７分