Manual: Control software

11
V-1SDI RCS Owner’s Manual
5. When the SYSTEM UPDATE dialog box appears, check to
make sure “Update Mode” is displayed in the top eld.
* If “---” is displayed in the top eld, disconnect and reinsert the
USB cable.
6. Click the [Open Bin File] button to display the Update
Bin File dialog box, then specify the program le
(V-1SDI_ver****.bin).
The version information for the update le is displayed in the
middle eld.
7. Click the [Start Update] button.
(To quit without updating, click the [Close] button.)
The update starts.
When the update is completed, the message “Update Completed.”
appears.
8. Turn the power to the V-1SDI o and back on, then check
the version information.
Follow the procedure in “How to tell the version” (p. 10) to check
whether the system has been updated.