Manual: Control software

2
About V-1SDI RCS
V-1SDI RCS is software for connecting a computer and the V-1SDI via USB and operating the V-1SDI remotely using the computer.
From V-1SDI RCS, you can perform panel operations and make menu settings on the V-1SDI unit. You can also save settings created in V-1SDI RCS to a
le on the computer,(*1) and save the settings on the V-1SDI itself.
Performing operations in V-1SDI RCS is possible even when no connection is made to the V-1SDI unit (oine).(*2) This means that at times such as
during prior planning for system design, you can create settings using only V-1SDI RCS and save the created settings to the on-site V-1SDI unit later.
USB
(*1) Only V-1SDI RCS settings are saved in the le. Values in the V-1SDI's memories (1 through 8) are not saved.
(*2) Items that can be manipulated while oine are limited.
System Requirements
Operating System
Windows Windows 7 Service Pack 1 or later
Mac OS X 10.9 or later
CPU
Windows
Intel Core 2 Duo or higher, or compatible processor
* No assurance is made regarding the compatibility of compatible processors themselves.
Mac Intel Processor
RAM 2 GB or more
Required Disk Space 100 MB or more
Graphics
1280 x 720 resolution or higher
Full Color (24-bit) or higher
USB Port USB 2.0
* Operation of V-1SDI RCS on a standard computer that satises the conditions just described has been conrmed, but all operation under these
conditions is not assured. Please be aware that even under identical conditions, computer-specic dierences in design specications or usage
environment might result in dierences in processing capacity.
Making the Connection to a Computer
* Making the connection using an extension cable or USB hub might result in the computer failing to recognize the V-1SDI. We recommend using a
direct connection between the V-1SDI and the computer.
1. Using a USB cable, connect a USB 2.0 port on the computer to the USB port on theV-1SDI.
USB 2.0 port
2. Turn on the power to the V-1SDI.
3. Start the computer.
4. Wait for communication between the V-1SDI and the computer to be established.
When communication with the computer starts, the operating system’s standard driver is automatically installed.
Introduction