Manual: Control software

6
For more information about menu items, go to the V-1SDI Reference Manual and refer to “Menu List” (p. 2).
2
3
4
5 6
1
No. Name Explanation
1
Menu bar This displays the menus. For more information about the menus, refer to “Menu Bar” (p. 8).
2
Operation panel
This controls the operation panel on the V-1SDI.
* When oine, the [FREEZE] button and [AUTO] button cannot be operated.
3
MEMORY
* Operation is not possible when oine.
[1]–[8] buttons
These control the memory function.
Pressing the [Save] button and then clicking the button from [1] through [8] that corresponds to the number
where you want to save the settings saves the current settings in the V-1SDI’s memory.
* PANEL and SYSTEM dialog box settings are not saved in the V-1SDI’s memory. Only a single set of settings is
saved on the V-1SDI.
Also, clicking the button from [1] through [8] for the number whose settings you want to recall calls up the
settings saved in the V-1SDI.
The currently selected button lights up in blue.
[Save] button
[Init] button
This initializes the values in the currently selected memory on the V-1SDI.
* PANEL and SYSTEM dialog box values are not initialized.
4
SETUP
[Input] button
This displays the VIDEO INPUT dialog box.
Aected settings: SETUP menu settings at VIDEO INPUT (pages 1/16 and 2/16)
[Output] button
This displays the VIDEO OUTPUT dialog box.
Aected settings: SETUP menu settings at VIDEO OUTPUT (pages 3/16 and 4/16)
[PinP] button
This displays the PinP dialog box.
Aected settings: SETUP menu settings at TRANSITION/PinP (page 6/16)
[DSK] button
This displays the DSK dialog box.
Aected settings: SETUP menu settings at DSK (pages 7/16 and 8/16)
[Panel] button
This displays the PANEL dialog box.
PANEL tab Aected settings: SETUP menu settings at PANEL (page 9/16)
LOCK 1 tab Aected settings: SETUP menu settings at PANEL LOCK (page 10/16)
LOCK 2 tab Aected settings: SETUP menu settings at PANEL LOCK (page 11/16)
LOCK 3 tab Aected settings: SETUP menu settings at PANEL LOCK (page 12/16)
[System] button
This displays the SYSTEM dialog box.
Aected settings: SETUP menu settings at MEMORY (page 13/16) and SYSTEM (pages 14/16–16/16)
* “A/B FADER CALIBRATE” and “FACTORY RESET” can be accessed only on the V-1SDI itself.
[V-1SDI] button
This switches V-1SDI RCS online or oine (p. 4).
When switched online, you can operate the V-1SDI from V-1SDI RCS.
[Pref] button This displays PREFERENCE dialog box. This performs an update of the V-1SDI's system program.
Panel Descriptions