User Manual

19
Connecting External Equipment
Connecting Source Equipment
Connecting Video Sources
Use the menus to assign sources to channels instead of using the button operations described below. Select a channel (Ch. 1 - Ch. 4) in the Input
menu (p. 46), then select the source to assign.
Making an HDMI Connection
Connect video cameras or other devices capable of HDMI output to the HDMI connectors at INPUT 1 through 4.
g.HDMI-connection.eps
To assign HDMI input to channel 1, go to [A-BUS/PGM] and press [1], then press the [HDMI] button. When the V-40HD detects the
HDMI input, the [INPUT STATUS] indicator of the channel 1 lights up.
g.select-HDMI-in.eps
To connect a computer capable of DVI output, use a DVI - HDMI conversion cable to make the connection to an HDMI connector.
Making an RGB Connection
Connect computers or other devices capable of RGB output to the RGB/COMPONENT connectors at INPUT 1 through 4.
g.connect-PC-RGB.eps
To assign RGB input to channel 4, go to [A-BUS/PGM] and press [4], then press the [RGB/COMPONENT] button. When the V-40HD
detects the RGB input, the [INPUT STATUS] indicator of the channel 4 lights up.
g.select-rgb-in.eps