User Manual

48
Menu Operations and Menu List
Detailed setup for Composite
Scaling
Zoom 50% - [100%] This sets the zoom ratio.
Type [Full], Letterbox, Crop, Manual
This selects the cropping format. For details of the values,
see [Type] of [Scaling] in the Input menu (p. 46)
Size H -1000 - [0] - +1000 This sets the horizontal size.
Size V -540 - [0] - +540 This sets the vertical size.
Position H -200 - [0] - +200 This sets the horizontal position.
Position V -150 - [0] - +150 This sets the vertical position.
Color Correction
Brightness -64 - [0] - +63 This adjusts the brightness.
Contrast -64 - [0] - +63 This adjusts the contrast.
Saturation -64 - [0] - +63 This adjusts the saturation.
Red -64 - [0] - +63 This adjusts the red level.
Green -64 - [0] - +63 This adjusts the green level.
Blue -64 - [0] - +63 This adjusts the blue level.
Detailed setup for PVW Out
DVI-D/HDMI Signal DVI-D, [HDMI] This selects the output mode of the PVW OUT.
Transition menu
Time 0.0s - [1.0s] - 10.0s, 0s00f - 10s00f, 0f - 300f This sets the transition time based on the units selected.
Unit [Seconds], Seconds + Frames, Frames This selects the unit for transition time.
Wipe Pattern 1, 2, MIX, CUT
This selects the wipe pattern from wipe pattern memory 1
or 2 and MIX (cross-fade) or CUT.
Detailed setup for Wipe Pattern 1/2
Pattern
Horizontal, Vertical, Horizontal Open, Vertical Open, Upper Left,
Upper Right, Lower Left, Lower Right, Box
This selects the type of wipe pattern.
Direction [Normal], Reverse, N/R
This selects the wipe direction. Selecting [N/R] switches
the wipe direction (normal <> reverse) reciprocally.
PinP menu
Status [OFF], PVW, PGM
Selects the output status of PinP compositing from among the following:
OFF : No display.
PVW : Displayed at preview output.
PGM : Displayed at nal output.
Detailed setup for Position 1 - 4
Make settings related to the PinP [1] - [4] buttons.
Size 10% - [30%] - +100% This sets the size of the inset screen.
Position H -100% - +100% This sets the horizontal position of the inset screen.
Position V -100% - +100% This sets the vertical position of the inset screen.
Cropping Type [Original], 4:3, 5:4, 16:9, Manual
This selects the image ratio when cropping the inset
screen.
When Manual is selected for Cropping Type, you can make the following settings:
Manual Cropping H -2000 - [0] - +2000 This sets the horizontal cropping width.
Manual Cropping V -2000 - [0] - +2000 This sets the vertical cropping width.
View These specify zoom in/out amount and position of the image displayed in the inset screen.
Size [100%] - 1000% This sets the amount of zoom in or out.
Position H -1920 - [0] - +1920 This sets the horizontal display position.
Position V -1200 - [0] - +1200 This sets the vertical display position.