Owner`s manual

22
Connecting External Equipment
Checking the Connections
You can check the connections of input and output equipment at the screens described below. To access the checking screens,
press the [VIDEO] button or [AUDIO] button in INPUT section.
* Depending on the input and output connectors used, some connections cannot be checked.
* The checking screen is displayed over the picture on the monitor. You can hide the picture on the monitor by pressing the lighted MONITOR
button to make it go dark.
g.input-buttons.eps
Video Input/Output Equipment
Pressing the [VIDEO] button in INPUT section displays the screen shown below. A yellow box next to the icon for a connector
indicates that the connection is recognized by the V-4EX. If the box is gray, no connection is detected.
* The recognition status (grey or yellow) of CH4’s RGB/Component connector is displayed only while the connector is selected. When it is not
selected, the display is grey regardless to the recognition status.
g.video-connect-screen.eps
Audio Input/Output Equipment
Pressing the [AUDIO] button in INPUT section displays the screen shown below. A yellow box next to the icon for a connector
indicates that the connection is recognized by the V-4EX. If the box is gray, no connection is detected.
g.audio-connect-screen.eps