Owner`s manual
43
Menu Operations and Menu List
SETUP Menu
HDCP [OFF], ON This turns HDCP on/o.
OUTPUT RESOLUTION
[AUTO], 480/576i,
480/576p, 720p, 1080i,
1080p, 640x480, 800x600,
1024x768, 1280x768,
1280x1024, 1366x768,
1400x1050, 1600x1200.,
1920x1200
This species the output resolution.
OUTPUT H.POSITION -200 - [0] - 500 This adjusts the output position in the horizontal direction.
OUTPUT V.POSITION -200 - [0] - 500 This adjusts the output position in the vertical direction.
OUTPUT H.SIZE [100.0%] - 150.0% This adjusts the output size in the horizontal direction.
OUTPUT V.SIZE [100.0%] - 150.0% This adjusts the output size in the vertical direction.
OUTPUT CONTRAST 0 - [64] - 127 This adjusts the output contrast.
OUTPUT BRIGHTNESS 0 - [64] - 127 This adjusts the output brightness.
OUTPUT COLOR 0 - [64] - 127 This adjusts the output color.
OUTPUT COLOR SPACE [AUTO], RGB, YCC This sets the output color space.
OUTPUT DVI-D/HDMI [AUTO], DVI-D, HDMI This sets the output mode of the HDMI connector.
OUTFADE WHITE LEVEL 0 - [255] This sets the white level during output fade.
OUTFADE BLACK LEVEL [0] - 255 This sets the black level during output fade.
NAM/FAM CROSS
POINT
0 - [50] - 100 This sets the point during NAM/FAM transition (p. 45).
FADER MODE [NORMAL], QUICK This selects the operation mode of the video fader.
FADER CURVE
[CURVE-A],
CURVE-B, CURVE-C
This selects the operating curve of the video fader.
FADER CALIBRATE A This performs calibration of the video fader at the A-Bus end.
FADER CALIBRATE B This performs calibration of the video fader at the B-Bus end.
LCD PREVIEW ASPECT [16:9], 4:3 This selects the aspect ratio of monitor display.
LCD BRIGHTNESS LOW, [HIGH] This sets the brightness of the monitor.
MENU DISPLAY LEVEL 5 - [13] - 15 This adjusts the appearance level of menu display.
BCKGND LEV - OVERLAY 1 - [12] This adjusts the brightness of the background (four-way split screen) in overlay display.
NO SIGNAL BACK [BLACK], BLUE This selects the background color at times of no input.
COLOR BAR OUTPUT [OFF], ON This selects whether a color bar is output.
AUTO OFF OFF, [ON]
This makes the setting for AUTO OFF. When [ON] is selected, power is turned o
automatically (p. 10).
USB STREAMING [OUTPUT], MONITOR This selects the output from the USB port.
NTSC/PAL NTSC, PAL This switches between NTSC and PAL.
FACTORY RESET This returns the unit to its factory defaults.
* The valid setting range of OUTPUT H.POSITION and OUTPUT V.POSITION diers depending of the output resolution. In the invalid range,
changing of the value does not alter the image position.