User Manual
Table Of Contents
- Check the Included Items
- Contents
- About the Power Supply
- Part Names and Functions
- Connecting External Equipment
- About Input/Output Formats
- Inputting HDCP Signals
- Basic Operations
- Applying Filter Effects to Video
- Compositing Two Pictures
- About Other Features
- Menu Operations and Menu List
- Appendices
- Index
46
Appendices
Eects List
You can assign transition eects to the MIX, WIPE, and EFX buttons. You can also allocate lter eects and compositing eects to
the A-A-Busnd B-Bus Eect buttons.
g.eect-assign.eps
Transition Eects
Filter/Composition
Eects
Filter/Composition
Eects
If an eect has an “*” (asterisk) after its name, you can change its setting value in a smooth, continuous manner by turning the Eect Control dial.
Pressing a button to which such an eect is assigned makes the button ash. If no eect indicated by an “*” is assigned to the button, the button
lights up steadily when pressed. In such cases, operation of the Eect Control dial has no eect.
When multiple controllable eects are assigned to these buttons, you can control the eect of last pressed button using the dial. In such case, the
last pressed button ashes and previously pressed button(s) lights up steadily.
Transition Eects
Mix
g.MIX.eps
001 : Mix01 The A and B video is switched gradually.
002 : Fam01 This is an abbreviation of “full additive mix.” The A and B luminance levels are maintained during the transition.
003 : Fam* You can move the A/B cross point during FAM transition.
004 : Nam01 This is an abbreviation of “non-additive mix.” Display during transition starts with areas of high luminance.
005 : Nam* You can move the A/B cross point during NAM transition.
You can set the cross point (0% to 100%) by going to the SETUP menu (p. 44) and setting [NAM/FAM CROSS POINT].